EJECTOR AS 2500960 - Caterpillar

Main relief valve (1) and charging valve (2) are located in inlet manifold.Reference: Refer to System Operation, "Control Valve (Implement)" for additional information.Dual Tilt Valve (If Equipped)
Illustration 14 g03467117Dual tilt valve is located inside the left side of the radiator guard.Reference: Refer to System Operation, "Control Valve (Implement)" for additional information.Quick-Drop Valve
Illustration 15 g03467123Quick-drop valve is mounted at the front top center of the radiator guard.Reference: Refer to System Operation, "Quick-Drop Valve" for additional information.Hydraulic Oil Tank
Illustration 16 g06156965Hydraulic oil tank is at the rear of the right fender just in front of the fuel tank.Reference: Refer to System Operation, "Hydraulic Tank and Filter" for additional information.Implement Return Screen
Illustration 17 g06147929The implement return screen is located inside the hydraulic oil tank.Reference: Refer to System Operation, "Hydraulic Tank and Filter" for additional information.Hydraulic Oil Temperature Sensor
Illustration 18 g06158767The hydraulic oil temperature sensor is on the side the hydraulic oil tank.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Main Implement Pump Sensor
Illustration 19 g06145867
EH Only
The main implement pump sensor is on the valve stack.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Implement Lockout Switch
Illustration 20 g06145860The implement lockout switch is on the right-hand side of the operator.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Winch Lockout Switch
Illustration 21 g06145863The winch lockout switch is on the right-hand side of the operator.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Quick Drop Solenoid
Illustration 22 g03710762The quick drop solenoid is on the bottom side of the quick drop valve.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Dual Tilt Solenoid Valve
Illustration 23 g03710767The dual tilt solenoid is on the bottom side of the dual tilt valve.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.Implement Electronic Control Module (ECM)
Illustration 24 g03710770
EH only
The ECM is located behind the operator.Reference: Refer to System Operation, "Electronic Control (Hydraulic System)" for additional information.