EJECTOR-EXHAUST 3034290 - Caterpillar

3034290 EJECTOR-EXHAUST Caterpillar parts 120M, 12M

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3034290
303-4290
3034290

Weight: 6 pounds 2 kg.

Buy EJECTOR-EXHAUST 3034290 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Hacus - Forklift FPE354337 Oil Seal Metal Hacus Aftermarket - New

$7.81

11 Oct 2025
0.22[0.10] pounds
Amazon.com

Hacus - Forklift FPE354337 Oil Seal Metal Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.

$7.81

02 Dec 2024
0.22[0.10] Pounds
Amazon.com

Hacus - Forklift FPE354337 OIL SEAL METAL Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.

$25.74

25 Oct 2021

US: # 1 Quality Par

SEAL - OIL FOR HYSTER: 3034290
Parts Express HYSTER || All Brand new & rebuilt items comes with 1 year warranty. || SEAL - OIL. Category: HYSTER FORKLIFT PARTS. This part can also be found under the following part numbers: HY3034290 3034290 HYSTER 3034290 HYSTER3034290 3034290 . All Brand new & rebuilt items comes with 1 year warranty.

Number on catalog scheme: 7

Caterpillar 3034290 Parts scheme EJECTOR-EXHAUST

For full view, you need register

Compatible equipment models: 3034290:

MOTOR GRADER 120M 12M Caterpillar

Information:

Illustration 1 g00678381
Schematic of the Steering Oil Level Sensor
This diagnostic code is recorded when the ECM reads the signal and the frequency of the signal or pulse of the signal is not within an expected range. The possible causes of this failure are listed below:
The sensor has failed.
There are intermittent connections of the machine harness.
There are poor connections of the machine harness.
There are loose mechanical connections.
There is electro-magnetic interference.
The ECM has failed.System Response:This failure causes the steering oil temperature to indicate the maximum temperature or this failure causes the steering oil temperature to intermittently indicate the maximum temperature. Note: The "Sensor Voltage Test" within the topic "Pulse Width Modulated Sensor-Test" also covers the troubleshooting of a failed sensor.Test Step 1. CHECK THE ELECTRONIC CONTROL MODULE AND THE MACHINE HARNESS.
Turn the disconnect switch and the key start switch to the "ON" position.
Disconnect the machine harness from the sensor.
At the machine harness connector for the sensor, measure the voltage between the signal contact C (wire G439-YL(Yellow)) and the ground contact B (wire J842-BK(Black)). Expected Result:The voltage is 5.0 0.5 DCV. Results:
OK - The voltage is 5.0 0.5 DCV. The ECM and the machine harness are correct. Repair: The sensor has failed. Perform the Testing and Adjusting, "Pulse Width Modulated (PWM) Sensor Troubleshooting" procedure prior to replacing the sensor.STOP
NOT OK - The voltage is NOT 5.0 0.5 DCV. The ECM or the machine harness have failed. Proceed to test step 2.Test Step 2. CHECK THE GROUND CIRCUIT OF THE MACHINE HARNESS.
The sensor remains disconnected.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect J1 and J2 machine harness connectors from the ECM.
At the machine harness connector for the sensor, measure the resistance between ground contact B (wire J842-BK(Black)) and connector contact J2-19 (wire J842-BK(Black)). Expected Result:The resistance is less than 5.0 ohms. Results:
OK - The resistance is less than 5.0 ohms. The harness resistance is correct. Proceed to test step 3.
NOT OK - The resistance is greater than 5.0 ohms.Repair: The ground circuit in the harness has failed. There is an open circuit between the ground contact and frame ground. Repair the machine harness or replace the machine harness. STOPTest Step 3. CHECK FOR A SHORTED HARNESS .
The sensor and the ECM remain disconnected from the machine harness.
The disconnect switch and the key start switch remain in the OFF position.
Perform the measurements that are listed below at the machine harness connector for the sensor.
Measure the resistance between the signal contact C (wire G439-YL(Yellow)) and contact A (wire 113-OR(Orange)) of the +battery supply.
Measure the resistance between the connector contact J1-1 (wire 170-YL(Yellow)) of the ECM and contact C (wire G439-YL(Yellow)) of the harness connector for the sensor. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to test step 4.
NOT OK - The resistance is less than 5000 ohms. Repair: The machine harness has failed. There is a short between the +battery