EJECTOR ASSEM. 4J8047 - Caterpillar

Motion Control Lever
Illustration 1 g00901537
Motion Control Lever - This lever is used to control the machine forward/reverse direction, directional steering, engine throttle selection and to apply the brakes.
Illustration 2 g00901539
Forward (1) - Push the motion control lever forward to move the machine in a forward direction.Reverse (2) - Pull the motion control lever back to move the machine in a reverse direction.Left Turn (3) - Move the motion control lever to the left to steer the machine in a left direction.Right Turn (4) - Move the motion control lever to the right to steer the machine in a right direction.Brake Control (Proportional System) - The brakes will release when the motion control lever is moved to the FORWARD position or to the REVERSE position. The brakes will apply when the motion control lever is returned to the center position. The lever will return to the center position when released.Brake Control (Direct System) - The brakes will release when the motion control lever is moved to the FORWARD position or to the REVERSE position and either full or part throttle is selected. The brakes will apply when the motion control lever is returned to the center position. The lever will return to the center position when released.Throttle Control (Proportional System) - Move the motion control lever to either the FORWARD position or the REVERSE position. The further the motion control lever is moved, the more the engine RPM will increase.Bucket Control Lever
Illustration 3 g00901395
Bucket Control Lever - This lever is used to control the bucket functions of the machine.
Illustration 4 g00901399
Lower (5) - Push the bucket control lever forward to lower the bucket. The lever will return to the HOLD position when released.Raise (6) - Pull the bucket control lever back to raise the bucket. The lever will return to the HOLD position when released.Tilt Back (Curl) (7) - Move the bucket control lever to the left to tilt the bucket back. The lever will return to the HOLD position when released.Dump (8) - Move the bucket control lever to the right to dump the bucket. The lever will return to the HOLD position when released.Hold (9) - The bucket control lever will return to the HOLD position automatically when released. The bucket will remain in the position it is in when the lever is in the HOLD position.Transmitter Control Switches
Illustration 5 g00901401
Lower RPM Switch (10) (Direct System) - Press and hold this switch to activate the part throttle function. The engine speed should increase to a preset speed which is approximately 1/2 the maximum engine rpm.Horn Switch (11) - Press the spring return switch up to sound the horn.Front Light Switch (12) - Push the switch up to turn on the front lights.Rear Light Switch (13) - Push the switch up to turn on the rear lights.Note: If the remote shutdown switch is turned off while the lights are on, they will remain on. The remote shutdown switch must be turned back on to power up the transmitter to turn the lights off.Fire