EJECTOR LINES 6J5549 - Caterpillar

6J5549 EJECTOR LINES Caterpillar parts 637, 637B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6J5549
6J-5549
6J5549

Weight: 0.05 pounds 0 kg.

Buy EJECTOR LINES 6J5549 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SCRAPER,

Compatible equipment models: 6J5549:

WHEEL SCRAPER 637 637B Caterpillar

Number on catalog scheme:

Caterpillar 6J5549 Parts scheme EJECTOR LINES

For full view, you need register

Information:

Illustration 1 g00289497
Speed Sensor
(1) Speed sensor
(2) Locknut
(A) Air gap Note: The engine speed sensor is commonly referred to as a magnetic pickup sensor.This adjustment procedure is for the engine speed sensor.
Remove the speed sensor (1) from the flywheel housing. Remove all debris from the tip of the speed sensor. Align a ring gear tooth directly in the center of the threaded sensor opening.
By hand, screw the speed sensor (1) into the hole until the end of the sensor contacts the gear tooth.
Turn the sensor (1) in the counterclockwise direction through 270 degrees (three-fourths turn).
Tighten locknut (2) to 25 5 N m (18 4 lb ft). Note: Do not allow speed sensor (1) to turn as locknut (2) is tightened.