ELBOW 0008705 - Caterpillar

Warning Category 2
In this category, the action light flashes red. The warning category requires you to change the machine operation. Changing the machine operation will reduce the excessive temperature in one of the systems or in more than one of the systems. Also, changing the machine operation will reduce the excessive engine speed.If the alert indicator continues to flash, do not operate the machine. If the action light continues to flash, do not operate the machine.Warning Category 3
In this category, the action lamp is red. Also, the action alarm will sound. This category requires immediate shutdown of the operation in order to prevent severe damage to the system and/or to the machine.Do not operate the machine until the cause has been corrected.Messenger Display (If Equipped)
Illustration 5 g01397245
Digital Display Area (19) - This Messenger system shows information on digital display area (19) .Note: Do not operate the machine if the information that is shown on the digital display area cannot be understood.PREVIOUS Button (20) - Use this button to return to information that was previously shown on the digital display area.Scroll Up/Left Button (21) - This button is used to scroll up through information that is shown on the digital display area. The button can also be used to scroll to the left through information that is shown on the digital display area.Scroll Down/Right Button (22) - This button is used to scroll down through information that is shown on the digital display area. The button can also be used to scroll to the right through information that is shown on the digital display area.OK Button (23) - After you have made selections with the scroll up/left button (21) and with the scroll down/right button (22) , use this button in order to confirm those selections.When the engine start switch key is turned to the ON position, Messenger will return to the previous operator profile. There are two ways to activate the previously used operator profile. If the OK button (23) is pressed within 10 seconds of turning the engine start switch key to the ON position, the previous operator profile will be restored. If none of the buttons are pressed, the previous operator profile will be restored after 10 seconds.If the PREVIOUS button (20) is pressed within 10 seconds of turning the engine start switch key to the ON position, the operator can choose from a list of operator profiles. If the PREVIOUS button is pressed again, the operator can create a new profile.Default Screen
Illustration 6 g01302343
Use buttons (21) and (22) in order to scroll through the four options. Press button (23) when the desired option is selected.Four options are available from the default screen:"Main Menu" - All submenus are accessible via this option."Mach Settings" - This option is a shortcut to the "Machine Settings "menu."Oper 1" - This option is a shortcut to the "Operator Profile" menu."Job 2" - This option is a shortcut to the "Job" menu.Main Menu
The following menus are accessible via the Main Menu:
"Performance"
"Machine Settings"
"Totals"
"Operator Profile"
"Job