ELBOW 0008710 - Caterpillar

Illustration 4 g01212311
Remove bolts (5). Remove plate (6) .
Illustration 5 g01219667
Remove electrical switch assemblies (7). Remove horn button (8). Remove seals (9). Remove panel (10) .
Illustration 6 g01219668
Illustration 7 g01219669
Remove bolts (11). Reposition panel (12). Disconnect harness assembly (15). Remove panel (12), bolts (13) and bracket (14).
Illustration 8 g01219671
Illustration 9 g01212334
Remove bolts (16). Disconnect hose assemblies (17). Remove pilot valve (18) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 10 g01212334
Illustration 11 g01219671
Position pilot valve (18). Install bolts (16). Connect hose assembly (17) .
Illustration 12 g01219669
Illustration 13 g01219668
Install bracket (14) and bolts (13). Connect harness assembly (15). Position panel (12) and install bolts (11) .
Illustration 14 g01219667
Install panel (10). Install seals (9). Install horn button (8) and electrical switch assemblies (7) .
Illustration 15 g01212311
Position plate (6) and install bolts (5) .
Illustration 16 g01212310
Position plate (4) and install bolts (3) .
Illustration 17 g01212309
Install bracket (2) .
Illustration 18 g01212304
Install armrest (1) .End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".