ELBOW 0016871 - Caterpillar

Illustration 1 g01352483
Press the up arrow or the down arrow until "Increment Switch Adjustment" is highlighted.
Illustration 2 g01269805
Press the "OK" key.The dialog that is shown in Illustration 2 is shown.Complete one of the following steps:
Press the arrow keys in order to enter the amount that each press of the vertical offset buttons will increase or decrease the vertical offset.
Press the "Default 0.010" soft key in order to set the system default. The system default is 0.010 m (0.05 ft).
Press the "OK" key in order to save the settings and return to the "Setup Menu-Configuration" dialog.
Press the "ESC" key in order to exit to the "Plan View" screen. The changes take effect immediately.