ELBOW 0018420 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before installation, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Keep components covered and protected at all times.
Illustration 1 g01369881
Position handle control assembly (13) into main housing (15). Install screws (14) .
Illustration 2 g01369873
Install handle control assembly (13). Install bolts (11). Install gasket (10) .
Illustration 3 g01369869
Reposition parking brake control assembly (8) and install bolts (9) .
Illustration 4 g01369863
Connect harness assemblies (6) and install new cable straps (7) .Note: Note the location and routing of the harness assemblies and cable straps from the removal procedure.
Illustration 5 g01369858
Position cover assembly (5) and install bolts (4) .
Illustration 6 g01369846
Position acoustical panel (2) and armrest assembly (1). Install bolts (3) .