ELBOW 0037032 - Caterpillar

Removal Procedure
Start By:
Remove the bottom guard.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
Illustration 1 g01367452
Install Tooling (A) onto the hydraulic tank . Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Illustration 2 g02633258
Valve group (4) is located on the left side of the underside of the machine.
Disconnect harness assembly (1). Remove bolt (3) and the flange. Remove solenoid valve (2) from valve group (4). Installation Procedure
Install solenoid valve (2) in the reverse order of removal.
Tighten bolt (3) to a torque of 14 7 N m (10 5 lb ft).