ELBOW 0041007 - Caterpillar

Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressure air, wear a protective face shield and protective clothing.Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.
Personal injury can result when using cleaner solvents.To help prevent personal injury, follow the instructions and warnings on the cleaner solvent container before using.
Personal injury or death can result from a fire.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Do not pre-fill the fuel filter with fuel before you install the fuel filter. Contaminated fuel WILL DAMAGE the fuel system components.
Caterpillar STRONGLY recommends the use of high efficiency fuel filters. High efficiency fuel filters are designed in order to better protect diesel engines that have higher injection pressures and closer tolerances. Use of fuel filters that are NOT high efficiency fuel filters will result in shortened fuel system component life. Caterpillar high efficiency fuel filters are the preferred filters for Caterpillar engines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
In order to keep the engine in optimum condition, keeping the fuel free from contamination is important. As fuel system contamination usually occurs during refueling, the following points should be observed:
Only use clean fuel of the correct grade from a reliable source.
Do not refuel from contaminated containers or containers that are not suitable for fuel storage.
Do not use contaminated equipment.
Regularly clean the outside of the fuel filler cap and the area around the fuel filler cap.
Only use Caterpillar approved fuel filters. The use of Caterpillar filters is essential in order to protect the fuel system.
Do not service the fuel filters prior to the suggested maintenance interval. This action may increase the risk of contamination in the fuel system.Note: The service indicator for the fuel system will be illuminated if the sediment bowl needs to be emptied. The service indicator for the fuel system will be illuminated if the primary fuel filter is plugged or if the secondary fuel filter is plugged. If the indicator is illuminated, empty the water in the sediment bowl. If the indicator remains illuminated, replace the primary fuel filter and the secondary fuel filter.Note: In order to reduce the risk of contamination in the system, do not remove the primary fuel filter and the secondary fuel filter simultaneously. Perform these operations separately.Note: After the engine has stopped, you must wait for 60 seconds in order to allow the fuel pressure