ELBOW 0049289 - Caterpillar

Illustration 1 g03522779The new 444-3536 Guard As (1) and 444-3537 Clamp As (2) are part of the angle and tilt lines Group. The 444-3536 Guard As and 444-3537 Clamp As are direct replacement for 341-1392 Guard As and 260-1797 Clamp As.The 444-3536 Guard As and 444-3537 Clamp As are adaptable to the machines and effective in production with the machines that are listed in Table 1.
Table 1
Sales Model Adaptable to Machines Effective in Production with Machines
D6T S/N:DTD1-1243 S/N:DTD1244-UP
S/N:JZC1-301 S/N:JZC302-UP
S/N:RCW1-1415 S/N:RCW1416-UP
S/N:RRK1-302 S/N:RRK303-UP
S/N:KSB1-1623 S/N:KSB1624-UP
S/N:EJJ1-304 S/N:EJJ305-UP Rework of 341-1392 Guard As
Note: 444-3536 Guard As can be ordered or 341-1392 Guard As can be reworked using the following procedure. Regardless of if a new guard assembly is ordered or the old one reworked a new 444-3537 Clamp As needs to be ordered and used.
Illustration 2 g06163017
(A) 890 mm (35.04 inch)
(B) 40 mm (1.575 inch) Hole
Drill one hole (B) in the top of the guard assembly. Refer to Illustration 2 for the location of the hole (B).
Illustration 3 g06163019
(C) 375 mm (14.76 inch)
(D) 15.5 mm (0.610 inch) Hole
Drill one hole (D) on each side of the guard assembly. Refer to Illustration 3 for the location of the holes (D).