ELBOW 0054173 - Caterpillar

Illustration 1 g03590290
Right side view
Table 1
Specification for 247-0714 Engine Oil Filter Gp
Item Qty Part Specification Description
1 - - Torque for the plug is 100 15 N m (75 11 lb ft).
2 3 275-2604 Engine Oil Filter Screw the filter element onto the mounting base until the sealing surface contacts the base. Then tighten the filter element for an additional one full turn.
3 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85.0 to 100.0 N (19.0 to 22.4 lb).
Free length after test is 112.8 mm (4.44 inch).
4 2 7N-7697 Plunger Cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
5 3 109-2332 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
6 1 228-7097 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
7 3 7G-6713 Spring Length under test force is 57.2 mm (2.25 inch).
Test force is 109 5 N (25 1 lb).
Free length after test is 99.7 mm (3.93 inch).
8 3 1P-1367 Plunger Bypass valve must start to open at a pressure difference of 203 20 kPa (29 3 psi).
The plunger must move freely in the bore.
Illustration 2 g03590292
Rear view
Table 2
Item Qty Part Specification Description
8 - - Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
9 - - Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
Illustration 3 g03590294
Table 3
Item Qty Part Specification Description
11 - - Before assembly, lubricate the bore lightly with the lubricant that is being sealed.