ELBOW 0308315 - Caterpillar

Illustration 12 g00663326
Install two electrical connectors (29). Tighten two allen head screws (28). Allen head screws (28) secure the connections of electrical connectors (29) .
Illustration 13 g00663341
Install ground cable (33) in position. Secure ground cable (33) with bolt (32) .
Install hose (34) on the air filter sensor.
Illustration 14 g00663033
Install parking brake cable (25) in position. Install parking brake cable (25) into clip (26). Install parking brake cable (25) into retainer (27). Secure parking brake cable (25) into retainer (27) with two nuts (24) .
Remove the blocks between the cab and the frame. Lower the cab into position on the frame of the machine.
Illustration 15 g00663018
Install pilot control valve (22) in position. Secure pilot control valve (22) with two Torx screws (21) .
Connect three electrical connectors (23).
Install auxiliary pilot control valve (20) in position. Secure auxiliary pilot control valve (20) with two bolts (19) .
Illustration 16 g00663006
Install plate (18) in position. Secure plate (18) with three bolts (17) .
Illustration 17 g00662977
Install cover (16) in position.
Install armrest (14) in position. Secure armrest (14) with one Torx screw (13) .
Secure cover (16) with five Torx screws (15) .
Illustration 18 g00662964
Install cover (12) in position. Secure cover (12) with three bolts (11) .
Illustration 19 g00662738
Install two mounting bolts (10) on the rear of the cab. Bolts (10) secure the rear of the cab to the frame of the machine. Tighten bolts (10) to a torque of 370 N m (273 lb ft).
Illustration 20 g00662735
Install two mounting bolts (9) on the front of the cab. Bolts (9) secure the front of the cab to the frame of the machine. Tighten bolts (9) to a torque of 370 N m (273 lb ft).
Illustration 21 g00662725
Remove Tooling (A) from the roof of the cab.
Illustration 22 g00662694
Install battery (8) in the machine. Install two battery cables (6) on battery (8). Install cover (5) on the battery.
Secure battery (8) and cover (5) with battery clamp (7) and the bolt.
Illustration 23 g00662689
Install bracket (4). Secure bracket (4) with two bolts (3) .
Illustration 24 g00643579
Install cover (1). Secure cover (1) with four Torx screws (2) .
Fill the hydraulic tank. See Operations and Maintenance Manual, SEBU7208 for the correct procedure.
Fill the radiator. See Operations and Maintenance Manual, SEBU7208 for the correct procedure.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect Procedure".