ELBOW 1184728 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Lifting Bracket 2
B - Guide Stud
1 - 14 by 10 inch 2
Illustration 1 g01137704
Remove two bolts (1) and install Tooling (B).
Remove two bolts (3) and attach Tooling (A) and a suitable lifting device to vibration damper (2). The weight of vibration damper (2) is approximately 175 kg (385 lb). Remove remaining bolts (1). Remove vibration damper (2).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Lifting Bracket 2
B - Guide Stud
1 - 14 by 10 inch 2
C Loctite 243 -
Illustration 2 g01137704
Install Tooling (B) in the crankshaft.
Attach Tooling (A) and a suitable lifting device to vibration damper (2). The weight of vibration damper (2) is approximately 175 kg (385 lb).
Install the vibration damper on Tooling (B). Install bolts (1). Remove Tooling (B) and install remaining bolts (1). Tighten bolts (1) to a torque of 1125 100 N m (820 74 lb ft).
Remove Tooling (A). Apply Tooling (C) to the threads of bolts (3). Install bolts (3) and tighten to a torque of 55 7 N m (41 5 lb ft).