ELBOW AS 1488375 - Caterpillar

Table 2
Parts List for Center Lock Clamping Spacers    
Linkage    Pin    Pin Diameter (mm)    Center Lock Clamping Spacers Set (1)    Inside Dimensions
(mm)    Outside Dimension
(mm)    Thickness
(mm)    
312     Stick
Link     65     343-4530     (65.5)     (101)     (14)    
315     Stick
Link     (70)     343-4531     (70.5)     (130)     (14)    
B, S, C     Stick
Link     (80)     343-4532     (80.5)     (143)     (20)    
CB     Stick
Link     (90)     343-4533     (90.5)     (163)     (20)    
DB     Stick     (100)     343-4534     (100.5)     (184)     (20)    
Link (90)     343-4533     (90.5)     (163)    
TB     Stick     (110)     343-4535     (110.5)     (215)     (30)    
Link (100)     343-4534     (100.5)     (184)     (20)    
VB     Stick     (120)     351-9387     (120.5)     (231)     (30)    
Link (110)     343-4535     (110.5)     (215)    
HB     Stick     (130)     351-9073     (130.5)     (253)     (30)    
Link (120)     351-9387     (120.5)     (231)    
( 1 ) Set consists of two solid steel spacers and two locking rings
Illustration 2 g01899074
(A) Spacer (B) Locking ringSpare Pins
The standard width coupler is shipped without pins. Refer to Table 1 for spare pins if more pins are required. Each part number includes two spare pins and hardware for each additional work tool that is used with the hydraulic pin grabber quick coupler.Installation of the Spacer Pins and Center Lock Clamping Spacers
Slide the pin out of the way in order to allow one spacer and one locking ring onto the pin.
Slide the pin into the hinge plate.
Slide the spacers against the inside of the hinge plate.
If the bucket is equipped with an adjuster, adjust out the adjuster all of the way in order to allow for clearance of the spacers.
Verify that the clearance is a minimum of 10 mm (0.39 inch) on each side.