ELBOW AS 1759106 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant below the level of the tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01767358
Note: The machine has been removed for photographic purposes.
Remove panel (1) .
Illustration 2 g01767376
Note: The side guard has been removed for photographic purposes.
Disconnect hose assembly (2) and tube assembly (3) .
Illustration 3 g01767413
Attach a suitable lifting device to handrail (4). The weight of handrail (4) is approximately 31 kg (68 lb). Remove handrail (4) .
Illustration 4 g01767516
Attach a suitable lifting device and Tooling (A) to expansion tank (6). The weight of expansion tank (6) is approximately 155 kg (342 lb).
Remove bolts (5) and remove expansion tank (6) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    
Illustration 5 g01767516
Attach a suitable lifting device and Tooling (A) to expansion tank (6). The weight of expansion tank (6) is approximately 155 kg (342 lb).
Position expansion tank (6) and install bolts (5). Remove Tooling (A) and remove the suitable lifting device.
Illustration 6 g01767413
Attach a suitable lifting device to handrail (4). The weight of handrail (4) is approximately 31 kg (68 lb). Install handrail (4) .
Illustration 7 g01767376
Note: The side guard has been removed for photographic purposes.
Connect hose assembly (2) and tube assembly (3) .
Illustration 8 g01767358
Note: The machine has been removed for photographic purposes.
Install panel (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper filling procedure.