1H6775 ELBOW-INLET Caterpillar parts
Rating:
Alternative (cross code) number:
CA1H6775
1H-6775
1H6775
CA1H6775
1H-6775
1H6775
Weight: 0.40 pounds 0 kg.
Information:
Removal Procedure
Note: Rotate the upper structure in order to allow clearance for the lifting device.
Illustration 1 g00613657
Fasten lifting slings and a suitable lifting device to platform (1). Apply slight lifting tension to the platform.
Remove four bolts (2) and the washers.
Illustration 2 g00613663
Remove two bolts (3) and the washers.
Remove platform (1). The weight of the platform is approximately 170 kg (375 lb).
Repeat Step 1 through Step 4 in order to remove the other three platforms from the left and right side of the machine.Note: The left and right side platforms that are on the rear of the machine have a large red square that is painted on the top rear of the platform.Note: The above steps refer to the platforms on the left and right sides of the machine. The following steps refer to the platforms on the front and rear of the machine.
Illustration 3 g00613740
Remove six bolts (4) and the washers from the guards that are under the machine.
Illustration 4 g00613752
Position a lift truck under guards (6), as shown. Remove six bolts (5) and the washers. Remove guards (6) from the machine. The weight of the guards is approximately 105 kg (230 lb).
Illustration 5 g00613764
Open access door (7) .
Illustration 6 g00613776
Remove six bolts (8) and the washer.Note: Remove three bolts on each side of the machine.
Illustration 7 g00613770
Remove six bolts (9) and the washers.
Fasten lifting straps and a suitable lifting device to platform (10). Remove platform (10). The weight of the platform is approximately 135 kg (300 lb).
Repeat Step 6 through Step 11 in order to remove the platform on the other end of the machine.
Note: Rotate the upper structure in order to allow clearance for the lifting device.
Illustration 1 g00613657
Fasten lifting slings and a suitable lifting device to platform (1). Apply slight lifting tension to the platform.
Remove four bolts (2) and the washers.
Illustration 2 g00613663
Remove two bolts (3) and the washers.
Remove platform (1). The weight of the platform is approximately 170 kg (375 lb).
Repeat Step 1 through Step 4 in order to remove the other three platforms from the left and right side of the machine.Note: The left and right side platforms that are on the rear of the machine have a large red square that is painted on the top rear of the platform.Note: The above steps refer to the platforms on the left and right sides of the machine. The following steps refer to the platforms on the front and rear of the machine.
Illustration 3 g00613740
Remove six bolts (4) and the washers from the guards that are under the machine.
Illustration 4 g00613752
Position a lift truck under guards (6), as shown. Remove six bolts (5) and the washers. Remove guards (6) from the machine. The weight of the guards is approximately 105 kg (230 lb).
Illustration 5 g00613764
Open access door (7) .
Illustration 6 g00613776
Remove six bolts (8) and the washer.Note: Remove three bolts on each side of the machine.
Illustration 7 g00613770
Remove six bolts (9) and the washers.
Fasten lifting straps and a suitable lifting device to platform (10). Remove platform (10). The weight of the platform is approximately 135 kg (300 lb).
Repeat Step 6 through Step 11 in order to remove the platform on the other end of the machine.
Parts elbow Caterpillar catalog:
1H6640
ELBOW
Caterpillar
Caterpillar
1H6306
ELBOW
Caterpillar
Caterpillar
1H5691
ELBOW
Caterpillar
Caterpillar
1H5558
ELBOW-INLET
Caterpillar
Caterpillar
1H5519
ELBOW
Caterpillar
Caterpillar
1H5221
ELBOW
Caterpillar
Caterpillar
1J3104
ELBOW
Caterpillar
Caterpillar
1J1751
ELBOW-45 DEG.
Caterpillar
Caterpillar
1H9503
ELBOW A
Caterpillar
Caterpillar
1H9452
ELBOW A.
Caterpillar
Caterpillar
1H7628
ELBOW
Caterpillar
Caterpillar
1H6802
ELBOW
Caterpillar
Caterpillar