ELBOW 2037072 - Caterpillar

Personal ResponsibilityWhen the Assist System is engaged, the Assist System will control various machine functions. The Assist System is not a substitute for the personal judgment of an operator for the present work site situation or work site conditions. Failure to pay attention to work site situations or work site conditions with the Assist System engaged could result in personal injury or death. Always be aware of the work site situation and work site conditions when operating the machine with the Assist System engaged.
Be AlertDue to system limitations with the Assist System, warnings from the Assist System may be issued late, improperly, or not at all. Failure to respond to warnings from the Assist System with appropriate action could result in personal injury or death. Always be alert when operating a machine with the Assist System engaged and be ready to intervene to prevent an accident.
Operation Guidance
Ground personnel should maintain a safe distance from the machine. Remain out of the swing radius/swing zone, and always check for ground personnel in the swing radius/swing zone. Do not operate with ground personnel in the swing radius/swing zone.
When setting height or load restrictions, make sure that any work tools that are attached are in the least favorable position.
Check for the correct operation once the restriction has been set.
Validate proper settings both initially and periodically during machine operation.
Do not move the (machine) quickly when close to a restriction setting.
Do not operate the machine in a reckless manner.
Do not travel with the restriction set.
Reset the load restriction if the machine is moved to a different location.
Always check settings or reestablish desired settings after leaving the machine for any period to ensure desired performance.
If the proper setting procedure has been followed, but the system does not appear to be functioning properly, consult your Cat dealer.Hazard recommendations:
Return the joysticks to the neutral position once a limit has been reached
Operate the machine at a slow speed
Do not travelLifting operations with the machine
Ensure that Lift Mode is selected during lifting operations
Operate the machine at a safe speed
Take special care when traveling with a load attached
Do not operate the machine in a reckless manner