ELBOW 2633351 - Caterpillar

Illustration 1 g02709556
Table 1
Specification for 251-2301 Crankshaft Gp
Item Qty Part Specification Description
A 1 4N-0684 Dowel Maximum protrusion of dowel from the rear side of the crankshaft face is 8.4 mm (0.33 inch).
1 2 253-1752 Thrust Plate Thickness of new thrust plate is 5.74 0.04 mm (0.226 0.002 inch).
After assembly into the cylinder block, crankshaft end play with new thrust plates is 0.10 to 0.60 mm (0.004 to 0.024 inch).
Thrust plates to be used on center main bearing only.
B 1 7S-5005 Dowel Protrusion of dowel from the crankshaft surface is 4.1 0.5 mm (0.16 0.02 inch).