ELBOW AS-EXHAUST 2995537 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(1/2 - 13 UNC by 6 inch) 2 Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Support the engine.
Illustration 1 g01044587
Remove bolts (1) and install Tooling (A). Remove the remaining bolts.
Remove engine support (2) from the cylinder block. The weight of engine support (2) is approximately 24 kg (53 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(1/2 - 13 UNC by 6 inch) 2
Illustration 2 g01044587
Position engine support (2) on Tooling (A). The weight of engine support (2) is approximately 24 kg (53 lb).
Install bolts (1) finger tight. Remove Tooling (A) and install the remaining bolts.
Illustration 3 g01044639
Tighten the bolts in numerical order to a torque of 105 20 N m (77 15 lb ft). End By:
Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".