ELBOW ASSEM. 2P2221 - Caterpillar

There may be several specific safety messages on your generator set. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
Illustration 1 g03743289
Illustration 2 g03035898
Illustration 3 g03035899Universal Warning (1)This safety message is located on the enclosure for the control panel.
Illustration 4 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Automatic Starting (2)This safety message is located on the sides of the enclosure on enclosed generator sets. This safety message is located on the sides of the generator for open generator sets. This safety message is also located on the enclosure for the control panel.
Illustration 5 g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Crush (3)This safety message is located on the sides of enclosed generator sets. This safety message is also located on the base for open generator sets.
Illustration 6 g01381178
Crushing hazard! Read and understand the instructions and warnings in the Operation and Maintenance manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Hot Surface (4)This safety message is located on each side of the radiator on open generator sets. This safety message is located on the sides and the top of the enclosure for enclosed generator sets.
Illustration 7 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Electrocution (5)
This safety message is located on the side of the generator and on the enclosure for the circuit breaker. This safety message is also located on the side of the enclosure.
Illustration 8 g01392482
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Do not connect generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution