ELBOW-RADIATOR OUTLET 2P6146 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B - Loctite 5188 -
Illustration 1 g02437857
Attach Tooling (A) and a suitable lifting device onto flywheel housing (24). The weight of flywheel housing (24) is approximately 726 kg (1600 lb). Apply Tooling (B) to the mating surface of flywheel housing (24). Position flywheel housing (24). Install bolts (26).
Illustration 2 g01220583
Install bolts (25) that connect the oil pan to flywheel housing (24).
Illustration 3 g01220569
Install crankshaft position sensor (22). Install bolt (21). Connect harness assembly (23).
Illustration 4 g02437259
Install the gasket seal and cover (19). Install three bolts (17) and bolt (20). Connect harness assembly (18).
Illustration 5 g02436139
Rotate the engine so that the number one piston is at top dead center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Cen