ELBOW 2S8815 - Caterpillar

Illustration 1 g03136497
Table 1
Specification for 374-4628 Fuel Injection Pump Gp    
Item     Qty     Part     Specification Description    
A     -     -     Required dimension for rack and gears to engage at center of fourth tooth is
71.189 mm (2.8027 inch).    
1     8     113-7794 Bushing     Torque to
270 13 N m (199 10 lb ft).    
2     8     131-3719 O-Ring Seal     Before assembly, lubricate the bore lightly with the lubricant that is being sealed.    
3     20     0S-1615 Bolt     Torque to
14 4 N m (124 35 lb in).    
C     -     -     Timing dimension when each cam lobe turn to an angle of 25.8 degrees is
66.512 0.150 mm (2.6186 0.0059 inch).    
Illustration 2 g03136498
Table 2
Item     Qty     Part     Specification Description    
4     1     4P-6608 Bushing     Flush the bushing and with end of the housing within
0.00 to 0.10 mm (0.000 to 0.004 inch).    
5     1     4P-6607 Bushing     Installation depth (E) is
0.8 0.5 mm (0.03 0.02 inch).    
6     1     9Y-6118 Hollow Dowel     Protrusion (D) of the new dowel is
1.65 0.45 mm (0.065 0.018 inch).    
Illustration 3 g03136499
Table 3
Item     Qty     Part     Specification Description    
7     2     1S-6250 Dowel     Protrusion (F) of the new dowel is
5.0 0.5 mm (0.20 0.02 inch).