ELBOW AS-45 3156422 - Caterpillar

Illustration 1 g02464296
Table 1
Specification for 331-1960 Auger Conveyor and Mounting Gp    
Item     Qty     Part     Specification Description    
1     1     449-6241 Support As     Apply Loctite C5A Copper Anti-Seize to the surface of the support assembly.    
2     1     191-4423 Plate     Apply Loctite C5A Copper Anti-Seize to the surface of the plate.    
3     1     249-5220 Plate     Tighten the bolts enough so that free play has been removed in the auger frame. Tighten the plate with the jam nut.    
4     4     099-0169 Bolt    
5     1     103-3596 Plate     Apply gasket sealant to the surface of the plate to auger support.    
6     2     351-6598 Plate As     Apply Loctite C5A Copper Anti-Seize to the surface of the plate assemblies.    
7     1     449-6240 Support As     Apply Loctite C5A Copper Anti-Seize to the surface of the support assembly.    
8     2     106-9718 Auger Bearing     Apply blue Loctite 242 to the threads of the set screws for the auger bearings.    
-     2     3H-3340 Setscrew    
Illustration 2 g02464297
View of area A
Table 2
Specification For the 331-1960 Auger Conveyor and Mounting Gp    
Item     Qty     Part     Specification Description    
9     2     382-5519 Auger Bearing     Use the following procedure to assemble the auger bearings:
1. Tighten the split cap close to the shaft.
2. Fully push the split cap on the housing of the auger bearing.
3. Tighten the bolts of the split cap.    
10     4     4B-1771 Setscrew     Apply blue Loctite 242 to the threads of the setscrews.    
11     4     2H-3906 Socket Setscrew     Apply blue Loctite 242 to the threads of four socket setscrews.