ELBOW 3904712 - Caterpillar

Illustration 1 g01833503
(1) "Bypass Unavailable" (2) "UPS Notice" (3) "On-bypass" (4) "On-bypass" (5) "UPS Overload" (6) "Low DC Voltage" (7) "UPS Alarm" (8) "Off-line" (9) Lamp Test Switch (10) Alarm Silence (11) HornThe Remote Status Panel allows the user to monitor various functions through use of eight status lights.Specifications
Table 1
Remote Status Panel
Specifications    
Description    Value    
Input Voltage    
Input voltage to panel     15 to 45 VDC    
Power    
Power requirements     6 W maximum    
Physical Dimensions    
Height    
270 mm (10.62 inch)    
Depth    
86 mm (3.37 inch)    
Width    
86 mm (3.37 inch)    
Weight    
1.14 kg (2.5 lb)    
Distance from UPS     less than
305 m (1000 ft)    
Environmental Specifications    
Horn (Output)     80 dB(A)
nominal    
Temperature range    
−40 °C (−40 °F) to
70 °C (158 °F)    
Humidity     0 to 100% relative humidity    
Emissions and Immunity     IEC 801-2
IEC 801-3
IEC 801-4
EN 5082-2
89/392/EEC Certification (EEC)    Connecting to the Remote Status Panel
The system is designed for flush mounting or surface mounting in a panel box. The system uses 18 AWG or larger wire. The wire will consist of three conductors. The wire consists of a data conductor, a ground conductor, and a power conductor. There are 14 screw connections on the back of the status panel that are labeled. Refer to Table 2.
Table 2
Connections (Remote Status Panel)    Connections (System Input/Output Daughter board) (J5)    
Terminal 1 "+24 VDC"     Connection 1    
Terminal 2 "Serial data in"     Connection 5    
Terminal 3 "Spare"        
Terminal 4 "Spare"        
Terminal 5 "Spare"        
Terminal 6 "Jumper to 7"        
Terminal 7 "Ground"     Connection 3    
Terminal 8 "Spare"        
Terminal 9 "Jumper to 6"        
Terminal 10 "Spare"        
Terminal 11 "Spare"        
Terminal 12 "Lamp test (1)"        
Terminal 13 "Horn silence (1)"        
Terminal 14 "Horn output (1)"