ELBOW 3B7728 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Gp 1
Illustration 1 g00994070
Lower the temperature of bearing (10).
Use Tooling (A) in order to install bearing (10) into adapter assembly (4). The oil hole in the bearing must align with the hole in the adapter assembly. The bearing must not project above the adapter assembly. After assembly, the inner diameter of the bearing must be 75.000 0.055 mm (2.9527 0.0022 inch).
Install O-ring seals (11) onto adapter assembly (4).
Illustration 2 g00994066
Install gear (9) onto shaft assembly (6).
Install bolts (8).
Illustration 3 g00994065
Install adapter assembly (4) onto shaft assembly (6).
Position thrust washers (7) onto adapter assembly (4).
Install bolts (5).
Illustration 4 g00994064
Lower the temperature of bearing (1).
Use Tooling (A) in order to install bearing (1) into adapter assembly (2). After assembly, the inner diameter of the bearing must be 75.000 0.055 mm (2.9527 0.0022 inch).
Install O-ring seal (3) onto adapter assembly (2). End By:
Install the engine oil and water pump drive. Refer to Disassembly and Assembly, "Engine Oil and Water Pump Drive - Install".