ELBOW 3E2333 - Caterpillar

(1) Fuel pump drive gear.(2) Washer. Assemble with large diameter away from gear.(3) Bolt. With the timing pin and timing bolt correctly installed, put a clockwise force of 68 N m (50 lb ft) on the drive gear for the fuel pump and tighten bolt to ... 270 25 N m (200 20 lb ft)(4) Fuel pump idler gear. Bore in idler gear for bearing ... 41.288 0.008 mm (1.6255 .0003 in)Depth to install bearing in gear ... 3.00 0.25 mm (.118 .010 in)Diameter of idler gear shaft (new) ... 34.995 0.013 mm (1.3778 .0005 in)Clearance between shaft and bearing (new) ... 0.050 to 0.076 mm (.0020 to .0030 in)Maximum permissible clearance between shaft and bearing ... 0.230 mm (.0091 in)(5) Tighten two bolts to a torque of ... 50 10 N m (37 7 lb ft)(6) Tighten nut to a torque of ... 25 6 N m (18 4 lb ft)(7) Plate. Assemble machined side of plate adjacent to the shaft.(8) Camshaft gear.(9) Tighten bolts to a torque of ... 55 10 N m (40 7 lb ft)(10) Crankshaft gear. Maximum temperature of the gear for installation on the crankshaft ... 315°C (599°F)Align camshaft gear (8) and crankshaft gear (10) using timing marks.(11) Idler gear for engine oil pump.(12) Drive gear for engine oil pump.