ELBOW 5263639 - Caterpillar

Illustration 1 g01261552
If required, use one or more of the following tools in order to set the horizontal offset value:
Press "Left/Right" to select the side of the alignment the offset is applied to
Directly edit the numerical field
Press "Half Bucket Width" in order to set a horizontal offset that is half the machine's bucket width.
Press "Set 0.000" in order to reset the offset value to zero
Press "+0.010" or "–0.010" in order to increment the offset or decrement the offset by 10 mm (0.4 inch)
Press "OK" in order to confirm the settings, or press "ESC" in order to exit without saving. You are returned to a guidance screen.