ELBOW-HYDRAULIC 6V6263 - Caterpillar

Illustration 14 g01325573
Illustration 15 g01325572
Install bearings (48).
Install port plate (45) and gasket (44).
Install head (47).
Repeat Step 25 for head (47).
Install coupling (46).
Illustration 16 g01325564
Repeat Steps 16 through Steps 22 for barrel assembly (34).
Install barrel assembly (34).
Illustration 17 g01325541
Install housing (22) and bolts (21). Tighten bolts (21) to a torque of 110 10 N m (81 7 lb ft).
Illustration 18 g01377507
Illustration 19 g01377504
Install crossover relief valves (14B), backup ring (14D), O-ring seal (14C), O-ring seal (14E), and plugs (14A) into the head.
Illustration 20 g01325540
Install O-ring seal (20), backup ring (19), and O-ring seal (18).
Illustration 21 g01325538
Install O-ring seals (17), backup rings (16), and O-ring seal (15).
Illustration 22 g01325536
Install valve (11). Tighten valve (11) to a torque of 44 3 N m (32 2 lb ft).
Install cartridge (14), coil (12), and nut (13). Tighten nut (13) to a torque of 80 10 N m (59 7 lb ft).
Install the cross over relief valves and the plugs into the head. Tighten plugs (21) to a torque of 110 10 N m (81 7 lb ft).
Illustration 23 g01377500
Install screen (6A).
Illustration 24 g01325526
Install cartridge (6), bolts (5), coil (4), the O-ring seal, and nut (3). Tighten bolts (5) to a torque of 5.5 0.1 N m (49 0.9 lb in).
Illustration 25 g01325527
Install control arm (8) and gasket (7).
Apply Tooling (E) to control arm (8).
Illustration 26 g01325534
Install valve (10) and bolts (9). Tighten bolts (9) to a torque of 13 1 N m (115 9 lb in).
Illustration 27 g01325524
Repeat Steps 39 through Steps 40 for valve (2).
Install bolts (1) and valve (2). Tighten bolts (1) to a torque of 13 1 N m (115 9 lb in).
Bench test the pump before installation into the machine. End By:
Install the piston pump (propel).