ELBOW 8B4884 - Caterpillar

Illustration 1 g00638803
Caterpillar Monitoring System For The EMCP II or The EMCP II+ Control Panels (1) Main display module (2) Scroll switch (3) Clear/mode switch (4) "LH/RH" switch (not used on the 3406E generator set) (5) Alert indicators (used on 3406E generator sets only)
Illustration 2 g00640338
Caterpillar Monitoring System For The EMCP II+P Control Panels (1) Main display module (2) Scroll switch (3) Clear/mode switch (4) "LH/RH" switch (not used on 3406E generator sets) (5) Alert indicators (used on the 3406E generator sets only)The 3406E generator sets, the 3412C generator sets, and the 3500 generators sets use three types of Caterpillar Monitoring System control panels. The control panels are listed below:
Caterpillar Monitoring Panel for the Control Panel for Switchgear Conversion
Caterpillar Monitoring Panel for EMCP II and EMCP II+ Control Panels
Caterpillar Monitoring Panel for EMCP II+P Control Panels with ParallelingThe Caterpillar Monitoring Panel for EMCP II and EMCP II+ control panels is shown in Illustration 1. The Caterpillar Monitoring Panel for EMCP II+P control panels is shown in Illustration 2.Note: The Caterpillar Monitoring System is optional. For more information, refer to Systems Operation, Testing and Adjusting, RENR2472, "Caterpillar Monitoring System for Electronic Modular Control Panel".The Caterpillar Monitoring System control panel consists of the following components:
Main Display Module
SwitchesMain Display Module
Illustration 3 g00638876
Main Display Module (1) Main display module (6) Spare alert indicators (used on 3406E generator sets only) (7) High exhaust temperature indicator (used on 3406E generator sets only) (8) High inlet air temperature indicator (used on 3406E generator sets only) (9) Inlet air pressure (boost) indicator (used on 3406E generator sets only) (10) High fuel temperature indicator (used on 3406E generator sets only) (11) Fuel pressure indicator (used on 3406E generator sets only) (12) Display areaMain Display Module (1) - The main display module (1) is the heart of the system. The main display module receives information from the switches, sensors and other electronic controls on the engine by using the CAT data link. The main display module processes the information. The main display module outputs the information to the display or the action alarm. The display components show the condition of engine systems and system diagnostic information.Spare Alert Indicators (6) - The spare alert indicators are used on 3406E generator sets only. Each spare indicator has a corresponding contact on the 40-pin connector of the main display module (1). The contacts are available for the customer to use. The alert indicators illuminate when the corresponding connector contact is connected to ground.High Exhaust Temperature Indicator (7) - This alert indicator is used on 3406E generator sets only. This