9L5911 ELBOW Caterpillar parts
3306
Rating:
Alternative (cross code) number:
CA9L5911
9L-5911
9L5911
CA9L5911
9L-5911
9L5911
Weight: 7 pounds 3 kg.
INDUSTRIAL ENGINE, MARINE ENGINE,
Compatible equipment models: 9L5911:
Number on catalog scheme:
12
For full view, you need register
Information:
Removal Procedure
Start By:
Release the system pressure.
Connect the steering frame lock.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all hoses and on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and to keep contaminants from entering the system.
Illustration 1 g01333601
Remove bolts (2) and cover (1) from the tilt cylinder.
Illustration 2 g01333605Note: The quantity and location of the shims should be noted down for assembly purposes.
Disconnect hose assemblies (3).
Attach a suitable lifting device to tilt cylinder (4). The weight of tilt cylinder (4) is approximately 45 kg (99 lb).
Remove nuts (5), the bolts, the caps, and the shims.
Remove bolts (8) and retainer (7). Remove pin (6).
Use the suitable lifting device to remove tilt cylinder (4) from the machine.Installation Procedure
Install tilt cylinder (4) in the reverse order of removal.
Start By:
Release the system pressure.
Connect the steering frame lock.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all hoses and on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and to keep contaminants from entering the system.
Illustration 1 g01333601
Remove bolts (2) and cover (1) from the tilt cylinder.
Illustration 2 g01333605Note: The quantity and location of the shims should be noted down for assembly purposes.
Disconnect hose assemblies (3).
Attach a suitable lifting device to tilt cylinder (4). The weight of tilt cylinder (4) is approximately 45 kg (99 lb).
Remove nuts (5), the bolts, the caps, and the shims.
Remove bolts (8) and retainer (7). Remove pin (6).
Use the suitable lifting device to remove tilt cylinder (4) from the machine.Installation Procedure
Install tilt cylinder (4) in the reverse order of removal.
Caterpillar parts catalog:
Parts elbow Caterpillar catalog:
14G, 1673C, 245, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 518, 528, 54, 613, 613B, 627B, 637D, 639D, 814B, 815B, 816B, 824C, 825C, 826C, 834B, 836, 916, 926...
3304, 3306, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 920, 930, 930R, 950, 980, 980B, C30, C32, D343, D348, D349, D353C, D379, D4E, D4E SR, D5B, D6D, G3412, G353D, G379, G398,...
12G, 16, 1673, 1673B, 3181, 3192, 3208, 3306, 3406, 3406B, 3408, 3412, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 627, 627B, 631C, 631E, 631G, 633E, 637, 637B, 637D, 637E, 637G...
120G, 12G, 130G, 140G, 14G, 1673C, 235B, 235C, 235D, 3304, 3306, 330B L, 3406, 3406B, 3406C, 3408, 3412, 518, 528, 54, 561D, 583K, 594H, 621E, 623E, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C,...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 14M, 16, 160G, 160H, 160H ES, 160H N...
140H, 143H, 14H, 160H, 163H, 1673C, 16H, 193, 225, 225D, 227, 3126E, 3208, 3304, 3306, 3306B, 374F L, 385B, 385C, 385C FS, 385C L, 390D, 390D L, 5090B, 518, 528, 561D, 613C, 615, 637G, 769D, 770, 771D...
120G, 12G, 130G, 140G, 14G, 1673, 16G, 235, 3116, 3126, 3126B, 3160, 3304, 3306, 3306B, 3408, 3408C, 3412, 3412C, 3412E, 518, 518C, 528, 528B, 530B, 589, 650B, 666B, 920, 930, 930R, 936, 950B, D25D, D...
120M, 120M 2, 12F, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 153, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 163, 1673, 1674, 16M, 225, 312D, 3304, 3306, 3406, 3406B, 3408, 3408C...
120G, 129, 12G, 130G, 140G, 14E, 14G, 14H, 14H NA, 16, 160G, 1673, 16G, 16H, 16H NA, 235, 245, 3192, 3304, 3304B, 3306, 3306B, 3512, 41, 518, 528, 528B, 583K, 613, 613B, 621, 621B, 623, 627, 627B, 631...
120B, 140B, 3306, 627B, 950, D4D, D6C, D7F
3304, 3306, 517, 518, 527, 583H, 621B, 621R, 627B, 631D, 633D, 637D, 639D, 641B, 650B, 651B, 666B, 768B, 769, 772, 773, 920, 930, 930R, 931B, 950, 963, 966C, 966F, 970F, 973, 973C, 977K, 980B, 983, C9...
1673C, 215, 225, 235, 3304, 3306, 518, 528, 627B, 637D, 920, 930, 950, 966C, 977K, D4D, D5, D6C, D6D, D7F, D7G
120G, 12G, 130G, 140G, 14G, 225, 227, 3204, 515, 518, 518C, 525, 528B, 530B, 545, 578, 613B, 613C, 615, 615C, 621, 621B, 623, 623B, 627, 627G, 637D, 637G, 641, 641B, 650B, 651, 651E, 657B, 657E, 666B,...
8N1104
ELBOW
D348
D348
4N5966
ELBOW
225, 3208, 613B
225, 3208, 613B
3N9278
ELBOW
7271
7271
5N5623
ELBOW
7271
7271
7N5637
ELBOW
D349
D349
7L7272
ELBOW
3304
3304
3N8037
ELBOW
D399
D399
0306819
ELBOW
633C, D348
633C, D348
1P0419
ELBOW
7211
7211
1673C, 227, 235, 235B, 235C, 245, 311D LRR, 312D, 314D LCR, 318C, 319C, 319D, 319D L, 319D LN, 3304, 561B, 561C, 621E, 621F, 621G, 621H, 621K, 623, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627E, 6...
3L0782
ELBOW
3208
3208