9S7704 ELBOW-FLARED Caterpillar parts
518, 518C, 528, 814B, 815, 815B, 816, 816B, 936, 950, 966C, 966D, 966F, 966F II, 966R, D6D, FB518, G936
Rating:
Alternative (cross code) number:
CA9S7704
9S-7704
9S7704
CA9S7704
9S-7704
9S7704
Weight: 0.14 pounds 0 kg.
Information:
ANGLE
90
DROP LENGTH
17
mm
NUT PART NUMBER
2K8851
RUN LENGTH
17
mm
THREAD SIZE
.62-18
THREAD SIZE
.62-18NPTF
TUBE OD
9.52
mm
FELLER BUNCHER, WHEEL SKIDDER,
Compatible equipment models: 9S7704:
Number on catalog scheme:
128
For full view, you need register
Information:
Remove Fuel Priming Pump
1. Remove the two mounting nuts. 2. Remove the fuel priming pump (1).Install Fuel Priming Pump
1. Position the fuel priming pump on fuel filter housing.2. Install mounting nuts.Disassemble Fuel Priming Pump
preparatory step: a) remove fuel priming pump 1. Press in on pins (1) and pull rod assembly out of barrel. Remove the pins and springs.2. Drive out handle retaining pin and remove the handle, cap (2) and spring (3). Remove the seal from cap.3. Remove seal and ring from rod.Assemble Fuel Priming Pump
1. Install seal and ring on rod.2. Install seal on cap. Position spring, cap and handle on rod assembly. Install retaining pin.3. Lubricate bore of the barrel lightly with clean engine oil.4. Position pins and springs in cap and install the rod assembly in barrel.concluding step: a) install fuel priming pump
1. Remove the two mounting nuts. 2. Remove the fuel priming pump (1).Install Fuel Priming Pump
1. Position the fuel priming pump on fuel filter housing.2. Install mounting nuts.Disassemble Fuel Priming Pump
preparatory step: a) remove fuel priming pump 1. Press in on pins (1) and pull rod assembly out of barrel. Remove the pins and springs.2. Drive out handle retaining pin and remove the handle, cap (2) and spring (3). Remove the seal from cap.3. Remove seal and ring from rod.Assemble Fuel Priming Pump
1. Install seal and ring on rod.2. Install seal on cap. Position spring, cap and handle on rod assembly. Install retaining pin.3. Lubricate bore of the barrel lightly with clean engine oil.4. Position pins and springs in cap and install the rod assembly in barrel.concluding step: a) install fuel priming pump
Caterpillar parts catalog:
Parts elbow Caterpillar catalog:
518, 518C, 528, 528B, 530B, 613, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C...
530B, 613, 613B, 613C, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 992, C15, TH35-C15T
3304, 950, 951B, 955K, 955L, 966C, D5
950, 955K, 955L, D4D
14E, 627, 966C, D6C
814, 815, 816, 930R, 966C, 977K, D6C, D6D, D6E SR
528, 528B, 530B, D6C
D6C, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL
69D, 768B, 768C, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 773E, 775B, 775D, 775E, 776, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C...
950, 966C, 966R
814, 815, 966C, 966R
966D
3W3331
ELBOW
973
973
4H7100
ELBOW
955C
955C
3H9227
ELBOW
191, 41
191, 41
1H6252
ELBOW
12E, 41
12E, 41
4F6089
ELBOW (INLET)
977D
977D