9X9506 ELECTRIC CONTROL Caterpillar parts
950F, 960F, 966F, 970F, 980F, 980F II
Rating:
Alternative (cross code) number:
CA9X9506
9X-9506
9X9506
CA9X9506
9X-9506
9X9506
Weight: 0.62 pounds 0 kg.
WHEEL LOADER,
Number on catalog scheme:
9
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
980F SERIES II WHEEL LOADER 5XJ00713-UP (MACHINE) POWERED BY 3406 ENGINE »
9X-9506
ELECTRIC CONTROL
950F SERIES II WHEEL LOADER 4DJ02865-03960 (MACHINE) »
9X-9506
ELECTRONIC CONTROL
960F WHEEL LOADER 6XL00273-UP (MACHINE) POWERED BY 3116 ENGINE »
9X-9506
ELECTRONIC CONTROL GROUP
966F SERIES II WHEEL LOADER 8BG02681-UP (MACHINE) POWERED BY 3306 ENGINE »
9X-9506
ELECTRIC CONTROL
970F WHEEL LOADER 7PL00196-UP (MACHINE) POWERED BY 3306 ENGINE »
9X-9506
ELECTRIC CONTROL
Caterpillar parts catalog:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06071674
Disconnect the harness assembly and remove filtered engine oil pressure sensor (2).
Remove the O-ring seal from the engine oil pressure sensor.
Disconnect the harness assembly and remove unfiltered engine oil pressure sensor (1).
Remove the O-ring seal from the engine oil pressure sensor.Installation Procedure
Illustration 2 g06071674
Install a new O-ring seal on filtered engine oil pressure sensor (2). Apply clean engine oil to the O-ring seal.
Install filtered engine oil pressure sensor (2) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect the harness assembly.
Install a new O-ring seal on unfiltered engine oil pressure sensor (1). Apply clean engine oil to the O-ring seal.
Install unfiltered engine oil pressure sensor (1) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect the harness assembly.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06071674
Disconnect the harness assembly and remove filtered engine oil pressure sensor (2).
Remove the O-ring seal from the engine oil pressure sensor.
Disconnect the harness assembly and remove unfiltered engine oil pressure sensor (1).
Remove the O-ring seal from the engine oil pressure sensor.Installation Procedure
Illustration 2 g06071674
Install a new O-ring seal on filtered engine oil pressure sensor (2). Apply clean engine oil to the O-ring seal.
Install filtered engine oil pressure sensor (2) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect the harness assembly.
Install a new O-ring seal on unfiltered engine oil pressure sensor (1). Apply clean engine oil to the O-ring seal.
Install unfiltered engine oil pressure sensor (1) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect the harness assembly.
Parts electric Caterpillar catalog:
8M2581
ELECTRIC STARTER GROUP
621, 980
621, 980
8L4245
ELECTRIC STARTING MOTOR GROUP
D379, D398
D379, D398
613, 613B
3L4438
ELECTRIC TACHOMETER GROUP
D326F, D337F
D326F, D337F
1715342
ELECTRIC CONTROL GROUP
814F, 815F, 816F, 824G, 825G, 826G, 950G, 962G, 966G, 972G, 980G, IT62G
814F, 815F, 816F, 824G, 825G, 826G, 950G, 962G, 966G, 972G, 980G, IT62G
3N0743
ELECTRIC STARTING MOTOR GROUP
D353C, G353D
D353C, G353D