AVSPARE.COM
parts catalog

ELECTRONICS GP 2501388 - Caterpillar



2501388 ELECTRONICS GP Caterpillar parts ELECTRONICS
Rating:
36
Alternative (cross code) number:
CA2501388
250-1388
2501388
Caterpillar 2501388 ELECTRONICS GP

Buy ELECTRONICS GP 2501388 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 2 g06153544
Table 2
Specification for 374-4733 Window Wiper Gp
Item Qty Part Specification Description
6 1 393-8112 Window Wiper Arm Gp Tension of the wiper blade from the glass edge of the window in the park position is 5.0 0.5 N m (44.3 4.4 lb in).
D - - Wiping angle from automatic parking position is 60 degrees.
E - - The distance of the front window wiper arm group from the automatic park position is 21.0 3.0 mm (0.83 0.12 inch).
7 - - Torque to 9 1 N m (80 9 lb in).
8 - - Torque to 7.5 0.5 N m (66.4 4.4 lb in).
9 - 5C-7261 Nut Use the following procedure to install the wiper arm:
1. Tighten the nut to 21 1 N m (186 9 lb in).
2. Wait for minimum of 0.5 hours to 4 hours maximum.
3. Again, tighten the nut to 21 1 N m (186 9 lb in).
Illustration 3 g06153545
Table 3
Item Qty Part Specification Description
F - - Distance of the wiper blades from the glass edges of the windows in the park position is 65.0 3.0 mm (2.56 0.12 inch).
G - - Angle for the window wiper arm group from the automatic park position is 105 degrees
10 1 222-5374 Window Wiper Arm Gp Tension of the wiper blade from the glass edge of the window in the park position is 4.3 0.5 N m (38.1 4.4 lb in).
11 1 222-5378 Window Wiper Arm Gp Tension of the wiper blade from the glass edge of the window in the park position is 4.3 0.5 N m (38.1 4.4 lb in).
Illustration 4 g06153548
Section H-H
Table 4
Item Qty Part Specification Description
12 - - Torque to 9 1 N m (80 9 lb in).
13 - - Torque to 7.5 0.5 N m (66.4 4.4 lb in).
14 - 5C-7261 Nut Use the following procedure to install the wiper arm:
1. Tighten the nut to 21 1 N m (186 9 lb in).
2. Wait for minimum of 0.5 hours to 4 hours maximum.
3. Again, tighten the nut to 21 1 N m (186 9 lb in).


Parts electronics Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.