ELECTRONICS GP-ENGINE RATINGS 2991419 - Caterpillar

System Information
Illustration 10 g03387969
IQANrun System Information (12) "System" button (13) "Machine ID" button (14) "Date and Time" button (15) "Language" button (16) "SIM PIN code" buttonSelect the "System" button (12) on the side tool bar in order to view system information, such as the application name and the machine identification (ID). Click "System" on the side tool bar.Machine ID
Use the "Machine ID" (13) button in order to view the machine id in the connected master module. The machine id contains up to 64 characters. The machine id is a unique text that identifies each machine. Typically, the machine chassis number or serial number is used as machine id. Logs and clone files are marked with the actual machine ID in order to identify which machine the files belong.Date and Time
Click "Date and Time" (14) in order to set the real-time clock in the connected display.Language
Selecting "Language" (15) sets the operating display language from the available listed choices.SIM PIN Code
Clicking "SIM PIN Code" (16) permits setting the SIM card PIN if a GSM modem is mounted and used by the WDS system. A SIM PIN code is a string that consists of four numerical characters, for example 4260. Enter a SIM PIN code if a GSM modem with a PIN code protected SIM card is used.Note: The SIM card can be inserted into a cell phone in order to select the SIM PIN protection to off.Saving System information
Click Save icon (9) in the main tool bar in order to save current system information as an HTML file.Adjust Groups
Illustration 11 g03387970
IQANrun Adjust Groups (17) "Adjust" button (18) List of adjustable groupsUse the "Adjust" button (17) in order to view list of adjustable groups (18). Highlight the desired group in the list with a single click, and then click "Select" (8) in order to open.Measure Groups
Illustration 12 g03387974
IQANrun Measure Groups (19) Component or function list (20) "Status" (21) Measured "Value" (22) "Raw value" (23) "Measure" button (24) "Add" button (25) "Delete" button (26) "Graph" button
Illustration 13 g03387975
Measure Icon Buttons (27) Start (28) Pause (29) StopUse this function in order to aid diagnostics by measuring one or more channels in real time. Measurements can be done both numerically and graphically. There is no need to open any application file in order to do the operation. All information needed by IQANrun is fetched from the connected display.Start by clicking the "Measure" button (23) on the side tool bar. A tree view of measure groups, measure items, and modules is displayed. The view is divided into three different groups: System measure groups, User-defined measure groups, and System status.Each listed group contains component or function list (19) with the "Status" (20), measured "Value" (21) and "Raw value" (22) as applicable for each.The User-defined measure group may be modified by adding or deleting custom or individual groups from the other categories for simplified diagnosis. Click "Add" (24) at the bottom left in order to add a new measure group. Right-click on the group and select "Rename" in order to rename