ELECTRONICS GP-POWER TRAIN 3103221 - Caterpillar

Assembly Procedure
Illustration 1 g02489516
Install screen assemblies (24) and nuts (23). Tighten nuts (23) to a torque of 10 1.5 N m (89 13 lb in).
Illustration 2 g02302413
Install sight glass (22) and bolts (21). Tighten bolts (21) to a torque of 10 1 N m (89 9 lb in)
Illustration 3 g02302433
Install valve (20).
Illustration 4 g02301841
Install spring (19).
Illustration 5 g02301773
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install flange (17), screen (16) and O-ring seals (15) into filter base assembly (18).
Illustration 6 g02301753
Install filter base (14).
Illustration 7 g02297800
Install bolts (13).
Illustration 8 g02297775
Install tube assembly (12).
Illustration 9 g02302457
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install O-ring seal (11) and filter (10). Install retainer (9), tube (8) and O-ring seal (7). Install end (6), spring (5) and nut (4).
Illustration 10 g02297573
Install filter assembly (3).
Illustration 11 g02489018
Install gasket (2).
Illustration 12 g02297517
Install cover (1). End By:
Install the hydraulic tank.