3531463 ELECTRONICS GP-MACHINE Caterpillar parts
416F
Rating:
Alternative (cross code) number:
CA3531463
353-1463
3531463
CA3531463
353-1463
3531463
BACKHOE LOADER,
Compatible equipment models: 3531463:
For full view, you need register
Information:
Removal Procedure
Personal injury can result from contact with refrigerant.This system is under pressure at all times, even if the engine is not running. Heat should never be applied to a charged system.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use caution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, evacuate the system recovering the refrigerant before removing the fitting.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel away from the machine or where they can be seen.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating Systems with R-134a For All Caterpillar Machines" for the procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.
Illustration 1 g03415467
Remove access door (1).
Illustration 2 g03415472
Disconnect hose assemblies (2).
Illustration 3 g03415476
Remove cover (3).
Illustration 4 g03415483
Remove belt (4). Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 5 g03415489
Disconnect harness assembly (5).
Illustration 6 g03415517
Disconnect tube (7). Remove bolt (8) and refrigerant compressor (6). Installation Procedure
Install refrigerant compressor (6) in the reverse order of removal.
Personal injury can result from contact with refrigerant.This system is under pressure at all times, even if the engine is not running. Heat should never be applied to a charged system.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use caution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, evacuate the system recovering the refrigerant before removing the fitting.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel away from the machine or where they can be seen.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating Systems with R-134a For All Caterpillar Machines" for the procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.
Illustration 1 g03415467
Remove access door (1).
Illustration 2 g03415472
Disconnect hose assemblies (2).
Illustration 3 g03415476
Remove cover (3).
Illustration 4 g03415483
Remove belt (4). Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 5 g03415489
Disconnect harness assembly (5).
Illustration 6 g03415517
Disconnect tube (7). Remove bolt (8) and refrigerant compressor (6). Installation Procedure
Install refrigerant compressor (6) in the reverse order of removal.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts electronics Caterpillar catalog:
1648239
ELECTRONICS GP-MONITOR
365B, 365B II, 365B L, 385B, 5090B
365B, 365B II, 365B L, 385B, 5090B
3174532
ELECTRONICS GP-MONITOR
938H, IT38H
938H, IT38H
1659043
ELECTRONICS GP-IMPLEMENT
621G, 623G, 627G, 631G, 637G, 657E
621G, 623G, 627G, 631G, 637G, 657E
3305363
ELECTRONICS GP-MONITOR
938H, 950H, 962H, 966H, 972H, 980H, IT62H
938H, 950H, 962H, 966H, 972H, 980H, IT62H
3126109
ELECTRONICS GP-POWER TRAIN
CX28, CX31
CX28, CX31
3491508
ELECTRONICS GP-MONITOR
770G, 770G OEM, 772G
770G, 770G OEM, 772G
3398910
ELECTRONICS GP-MONITOR
793F, 793F OEM, 793F-XQ, 797F
793F, 793F OEM, 793F-XQ, 797F
3887408
ELECTRONICS GP-MACHINE
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
3769116
ELECTRONICS GP-MONITOR
770G, 770G OEM, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G
770G, 770G OEM, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G
4497749
ELECTRONICS GP-MONITOR
844K, 990K
844K, 990K
3226842
ELECTRONICS GP-POWER TRAIN
924H, 924HZ, 928H, 928HZ
924H, 924HZ, 928H, 928HZ