AVSPARE.COM
parts catalog

ELECTRONICS GP-ENGINE RATINGS 3776974 - Caterpillar



3776974 ELECTRONICS GP-ENGINE RATINGS Caterpillar parts 772G ELECTRONICS
Rating:
36
Alternative (cross code) number:
CA3776974
377-6974
3776974
Caterpillar 3776974 ELECTRONICS GP-ENGINE RATINGS

Buy ELECTRONICS GP-ENGINE RATINGS 3776974 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3776974:

TRUCK  772G   Caterpillar
  For full view, you need register

Information:


Illustration 1 g01134803
Illustration 2 g01134800
Install O-ring seals (26) and (27) to transmission (24) and the bevel gear assembly. Attach Tooling (E) and a suitable lifting device to transmission (24) and the bevel gear assembly. Remove transmission (24) and the bevel gear assembly from Tooling (F). Position transmission (24) and the bevel gear assembly. The weight of transmission (24) and the bevel gear assembly is approximately 830 kg (1830 lb).
Illustration 3 g01134838
Illustration 4 g01134763
Attach Tooling (C) to transmission (24) and the bevel gear assembly. Attach a suitable lifting device to the end of Tooling (C) .
Position Tooling (C) onto suitable blocking in order to support transmission (24) and the bevel gear assembly.
Install bolts (23) .
Remove Tooling (C) and the suitable blocking.
Illustration 5 g01134719
Position cover (21) and the gasket. Install bolts (20) .
Position bracket (18). Move pin (17) outward until dowel (19) protrudes through the hole in bracket (18). Install bolt (22). Repeat for the opposite side.
Illustration 6 g01134714
Attach a suitable lifting device to guard assembly (16) and position guard assembly (16). The weight of guard assembly (16) is approximately 61 kg (135 lb). Install bolts (15) .
Illustration 7 g01134712
Install tube assemblies (7). Connect harness assembly (14) .
Illustration 8 g01134707
Position hose (12) and install clip (11). Install bolts (13), guard (9), and bracket assembly (10) .
Illustration 9 g01134703
Attach a suitable lifting device to manifold assembly (8) and position manifold assembly (8). The weight of manifold assembly (8) is approximately 29 kg (65 lb). Install bolts (5). Connect harness assembly (6) and tube assemblies (7) .
Illustration 10 g01134695
Connect hose assemblies (4) .
Illustration 11 g01134627
Position plate (3) and the O-ring seal. Install yoke (1). Install bolts (2) .
Illustration 12 g01105562
Remove Tooling (A) and install the hydraulic tank cap.
Fill the transmission with oil. Refer to Operation and Maintenance Manual, "Transmission System Oil and Screens - Change/Clean".End By:
Install the control valve for the ripper pin puller. Refer to Disassembly and Assembly, "Ripper Pin Puller Control Valve - Remove and Install".
Install the ripper carriage. Refer to Disassembly and Assembly, "Ripper Carriage - Remove and Install".
Install the main drive shaft. Refer to Disassembly and Assembly, "Main Drive Shaft - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
772G Off-Highway Truck LTS00001-UP (MACHINE) POWERED BY C18 Engine
772G OEM Off-Highway Truck RMH00001-UP (MACHINE) POWERED BY C18 Engine
772G OEM Off-Highway Truck TWB00001-UP (MACHINE) POWERED BY C18 Engine
772G Off-Highway Truck LTX00001-UP (MACHINE) POWERED BY C18 Engine


Parts electronics Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.