ELECTRONICS GP-MONITOR 3887413 - Caterpillar

2. Disconnect the ground level manual shutoff cable assembly (2) from the bracket.3. Disconnect hose (1) from the elbow.4. Loosen clamp (4) that holds tube assembly (3) to the hose. Remove the bolts that hold the elbow to the radiator. Remove tube assembly (3) and the elbow as a unit from the engine. 5. Remove the bolts and guard assembly (5) from the shield assembly. The left guard must be removed first. The right guard must be turned 180° to be removed. 6. Fasten nylon strap (7) and a hoist on fan (6) as shown. Remove the bolts and the nuts that hold the adapter and fan (6) to the fan drive. Carefully put the fan against the radiator. The weight to the fan and the adapter as a unit is 45 kg (100 lb.). Before the fan can be removed from the machine, adapter (8) must first be removed.7. Remove the bolts and adapter (8) from the fan. 8. Remove fan (6) from the machine.Install Fan
1. Fasten nylon strap (1) and hoist on fan (2). Lower the fan into the machine. 2. Install adapter (3) on the fan with the bolts that hold it. 3. Use nylon strap (1) and a hoist to put fan (2) and the adapter as a unit in position on the fan drive. Install the bolts and the nuts that hold the unit in position. 4. Install guard assembly (4) on the shield assembly. 5. Put tube assembly (6) and the elbow as a unit in position on the hose. Tighten clamp (8) that holds it.6. Install the gasket and connect the elbow to the radiator with the bolts that hold it.7. Connect hose (5) to the elbow.8. Connect the ground level manual shutoff cable assembly (7) to the bracket.9. Fill the radiator with coolant to the correct level. See the Maintenance Guide.