AVSPARE.COM
parts catalog

ELECTRONICS GP-MONITOR 3967457 - Caterpillar



3967457 ELECTRONICS GP-MONITOR Caterpillar parts 770G, 772G ELECTRONICS
Rating:
27
Alternative (cross code) number:
CA3967457
396-7457
3967457
Caterpillar 3967457 ELECTRONICS GP-MONITOR

Buy ELECTRONICS GP-MONITOR 3967457 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3967457:

TRUCK  770G   772G   Caterpillar
  For full view, you need register

Information:


Illustration 4 g01034125
Remove plug (4) and drain the oil from the bearing compartment into a suitable container for storage or disposal. The capacity of the compartment is 2 L (0.5 US gal).
Remove two cover bolts (5) .
Illustration 5 g01034131
Install Tooling (B). Remove remaining cover bolts (5) .
Illustration 6 g01034132
Install Tooling (C). Unseat cover (6) .
Illustration 7 g01034139
Install Tooling (D) to the back side of cover (6) .
Install a suitable lifting device to Tooling (D), as shown. Remove the cover and the O-ring seal. The weight of cover (6) is approximately 60 kg (130 lb).
Illustration 8 g01042287
Install two cover bolts (5) into ring (8) as forcing bolts. Unseat the ring. Remove bolts (5). Install Tooling (E) and completely unseat ring (7). Remove O-ring seal (7) .
Illustration 9 g01034179
Install Tooling (D) to ring (8) .
Install a suitable lifting device to Tooling (D), as shown. Remove ring (8). The weight of ring (8) is approximately 55 kg (120 lb).
Illustration 10 g01034496
Remove backup ring (9) .
Remove Tooling (B) .
Illustration 11 g01034195
Fasten a suitable lifting device to Tooling (E), as shown. The weight of Tooling (E) is approximately 64 kg (140 lb).
Illustration 12 g01034183
Install Tooling (E), install Tooling (D), and one cover bolt (5) to the bearing end of the final drive.
Illustration 13 g01034203
Remove the top three mounting bolts (10) for the final drive.
Illustration 14 g01034792
Install Tooling (F) to final drive.
Prepare a suitable lifting device with one leg of 3.00 m (10.0 ft) and another leg of 2.75 m (9.0 ft). Fasten a suitable lifting device and the 2.75 m (9.0 ft) leg of the lifting device to Tooling (F). Fasten Tooling (G) to the end of Tooling (E) and the lifting device. The weight of the final drive and Tooling is approximately 4040 kg (8900 lb).
Remove remaining 43 mounting bolts (10) for the final drive.
Illustration 15 g01034803
Slide final drive out of the track roller frame until Tooling (D) is accessible. Shorten the length of Tooling (G) until the 3.00 m (10.0 ft) leg of the lifting device can be attached to Tooling (D). Remove Tooling (G) .
Illustration 16 g01034804
Complete the removal of the final drive.
Illustration 17 g01035979
Install a suitable lifting device to sprocket (11). The weight of sprocket (11) is approximately 1860 kg (4100 lb). Remove sprocket (11) .

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts electronics Caterpillar catalog:

4307772 ELECTRONICS GP-MONITOR
770G, 770G OEM, 772G, 772G OEM
3874549 ELECTRONICS GP-ENGINE
772G, 772G OEM, 834K, 836K, 988K
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.