ELECTRONICS GP-ENGINE RATINGS 4155354 - Caterpillar

Attach the harness to the machine at the thirteen places that are indicated by the letter (X). Use one 4P-7581 Clip (7) and one 9X-6772 Strap (6) at each location.
Attach the harness to the front frame. Use one 4P-8134 Clip (65) and one 9X-6772 Strap (6) at each location.
Illustration 496 g00710547
Rear View of Front Frame (QQ) Front Pump Drive Oil Temperature Sensor (RR) Filter for the Front Pump Drive
Illustration 497 g00710551
Detail (SS) from illustration 496 (TT) Switch for the Center Hydraulic Case Drain Filter (UU) Connection to the Harness for the Bucket Positioner Sensor
Attach the harness to the machine at the two places that are indicated by the letter (X). Use one 4P-7581 Clip (6) and one 9X-6772 Strap (7) at each location.
Attach the harness to the frame with one 9X-6772 Strap (7), one 4P-7581 Clip (6), one 8T-4136 Bolt (9), and one 8T-4121 Washer (8) .
Install one 9X-7781 Bypass Switch (62) to each implement case drain filter. Connect the 245-9874 Harness to each bypass switch.Note: 243-1117 Wire As - Jumper (69) may be required in order to connect the harness. Wire (69) can be ordered through your dealer.
Illustration 498 g00682449
Left rear view of hydraulic tank
Place 175-6976 Harness (66) on the hydraulic oil tank.
Attach the harness to the tank at the four places that are indicated by the letter (X). Use one 4P-7581 Clip (7) and one 9X-6772 Strap (6) at each location.
Install 9U-2277 Clip (67) on the tank.
Illustration 499 g00710580
Case drain filter on the left side of the frame (VV) Switch for the Left Hand Hydraulic Case Drain Filter
Attach the harness to the frame with one 4P-7581 Clip (6) and one 9X-6772 Strap (7) .
Illustration 500 g00682627
Filter for the front pump drive
Attach the harness to the frame in two places with one 9X-6772 Strap (7), one 4P-7581 Clip (6), one 8T-4136 Bolt (9), and one 8T-4121 Washer (8) .
Attach the harness to the frame with one 9X-6772 Strap (7), one 4P-8134 Clip (65), one 8T-4136 Bolt (9), and one 8T-4121 Washer (8) .
Illustration 501 g00682638
Implement pilot oil filter
Attach the harness to the machine at the three places that are indicated by the letter (Y). Use one 4P-8134 Clip (65) and one 9X-6772 Strap (7) at each location.
Attach the harness to the frame at the three places that are indicated by the letter (X). Use one 4P-7581 Clip (7) and one 9X-6772 Strap (7) at each location.
Attach the harness to the frame with one 9X-6772 Strap (7), one 4P-7581 Clip (6), one 8T-4136 Bolt (9), and one 8T-4121 Washer (8) .
Connect the harness to the components on the machine.
Connect the harness for the front frame to the chassis harness.
Verify that the 224-6645 Power Train