4416264 ELECTRONICS GP-POWER TRAIN Caterpillar parts AD60 ELECTRONICS
Alternative (cross code) number:
Buy ELECTRONICS GP-POWER TRAIN 4416264 Caterpillar genuine, new aftermarket tractor parts with delivery
UNDERGROUND ART TRUCK,
Compatible equipment models: 4416264:
UNDERGROUND ART TRUCK AD60 Caterpillar
Illustration 1 g01252024
Engine speed sensorThis diagnostic code is for the engine speed sensor.This diagnostic code is recorded when the ECM reads the signal from the engine speed sensor and the ECM determines that the signal is erratic, intermittent or incorrect. This is determined when the ECM compares the signal from the engine speed sensor to the signal from the torque converter output speed sensor. A diagnostic code is recorded when the signal from the engine speed sensor is below the dropout value and the engine speed is above low idle.Note: The machine must be moving in order for the ECM to display this diagnostic code as being present. Test Step 1. CHECK THE RESISTANCE OF THE SENSOR.
Turn the key start switch to the OFF position.
Disconnect the machine harness from the speed sensor.
Measure the resistance between the two contacts of the connector for the speed sensor. Expected Result:The resistance measurement should be between 900 ohms and 1300 ohms. Results:
OK - The resistance measurement is between 900 ohms and 1300 ohms. The speed sensor has not failed. Proceed
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts electronics Caterpillar catalog:
3567847 ELECTRONICS GP-MACHINE
4378380 ELECTRONICS GP-MACHINE