ELEMENT-SAFETY 2996633 - Caterpillar

Problem
Reports have been received that the oil filter hose assembly may leak on the machines listed above. The oil filter hoses may rub on the clipping locations which may damage the hoses.Solution
In the event of failure, replace the 460-7696 Hose As and 460-7697 Hose As with the new 456-8560 Hose and coupling. Refer to following rework procedure.Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Table 1
Required Parts
Item Qty Part Number Part Name
1 2540.0 mm (99.99 inch) 456-8560 Hose
2 2 124-1974 Permanent Coupling
3 2640.0 mm (103.93 inch) 456-8560 Hose
4 2 124-2124 Permanent Coupling
5 2 228-7094 O-Ring Seal
6 1 204-2281 Cable Strap
7 1 8T-7088 Grommet
8 3 477-9886 Clip
9 6(1) or 2(2) 8C-8533 Clip
(1) For HAU Machines
(2) For XE Machines
Illustration 1 g06347101
(1) 456-8560 Hose 2540.0 mm (99.99 inch)
(2) 124-1974 Permanent Coupling
(3) 456-8560 Hose 2640.0 mm (103.93 inch)
(4) 124-2124 Permanent Coupling
Assemble the hose (1) with the permanent coupling (2) and assemble the hose (3) with the permanent coupling (4).
Illustration 2 g06347102
For XE Machines
(1) 456-8560 Hose 2540.0 mm (99.99 inch)
(3) 456-8560 Hose 2640.0 mm (103.93 inch)
(5) 228-7094 O-Ring Seal
(6) 204-2281 Cable Strap
(7) 8T-7088 Grommet
(8) 477-9886 Clip
(9) 8C-8533 Clip
Illustration 3 g06347103
For HAU machines
(1) 456-8560 Hose 2540.0 mm (99.99 inch)
(3) 456-8560 Hose 2640.0 mm (103.93 inch)
(5) 228-7094 O-Ring Seal
(6) 204-2281 Cable Strap
(7) 8T-7088 Grommet
(9) 8C-8533 Clip
Install the hose assembly (1) and (3) with the parts listed in Table 1.Note: Before installing the hose assembly (1) and (3), replace the O-ring seal (5) with the same part number.