ELEMENT 4848192 - Caterpillar

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Refer to the Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g02661136
Disconnect tubes assemblies (1) and (4).
Remove tube assemblies (2) as a unit.
Remove bolts (5) and transmission oil pump (3). Installation Procedure
Install transmission oil pump (3) in the reverse order of removal.