ELEMENT 5362510 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the engine to a level that is below the water pump into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g00578974
Remove bolts (2), elbow (1), and tube (3). Remove the O-ring seals at both ends of tube (3).
Illustration 2 g00578980
Remove bolts (4), flange (6), the seal, and the gasket.
Remove bolts (7), elbow (5), and the gasket.
Illustration 3 g00578978
Remove bolts (10).
Remove nuts (8) and bolt (9). Remove water pump (11), the seal, and the gasket.