5I5208 ELEMENT AS-SECONDARY Caterpillar parts
325, 325 L, 325 LN, E200B
Rating:
Alternative (cross code) number:
CA5I5208
5I-5208
5I5208
CA5I5208
5I-5208
5I5208
Weight: 1 pounds 0 kg.
EXCAVATOR,
Cross Reference:
ARMAFILT
L-145/315.0,
L-145/443.0,
BALDWIN
PA2545,
CATERPILLAR
5I-5208,
CROSLAND
9791,
DONALDSON
P127315,
FIL FILTER
HP 422,
FLEETGUARD
AF1767,
GIF FILTER
GA 847,
HENGST FILTER
E737LS,
HITACHI
4145213,
ISUZU
2-90646-920-0,
LUBERFINER
LAF 5208,
MISFAT
RM821,
SCT Germany
SW 3839,
WIX FILTERS
42521,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
NUEPWRFA 3I1073 7Y0413 9Y6849 7Y0404 3I0945 3I0831 Outer 3I0205 92E6102411 7Y0413 92E6102800 9Y6816 7Y0403 5I5208 Inner Air Filter SET Compatible for CATERPILLAR 320 320S 322 325 325LN DP120N EL240B
NUEPWRFA Part number: OUTER AIR FILTER 3I1073 7Y0413 9Y6849 7Y0404 3I0945 3I0831 || Part number: INNER AIR FILTER 3I0205 92E6102411 7Y0413 92E6102800 9Y6816 7Y0403 5I5208 || Approx. Dimensions: OUTER AIR FILTER Overall Length 342.8 mm (13.50 inch) Outer Diameter 232.2 mm (9.14 inch) Inner Diameter 146.8 mm (5.78 inch) Length 330.1 mm (13.00 inch) Bolt Hole Diameter 22.73 mm (0.89 inch) || Approx. Dimensions: INNER AIR FILTER Outer Diameter 144.8 mm (5.70 inch) Inner Diameter 116.3 mm (4.58 inch) Length 304.8 mm (12.00 inch) || Compatible for CATERPILLAR 320 320 L 320 S 322 325 325 LC 325 LN DP 120 N EL 240 B || Compatible for HINO P-KK196 P-KK198 P-KK199 RANGER P-FD162 RANGER P-FD164 RANGER P-FD165 RANGER P-FD166 RANGER P-FD168 RANGER P-FD169 RANGER P-FG192 RANGER P-FG193 RANGER P-FG194 RANGER P-FG195 RANGER P-FG196 RANGER P-FG197 || Compatible for ISUZU ESR 11 ESR 12 ESR 33 ETR 12 ETR 12 || Compatible for JCB JS 200 LC JS 240 LC LS 2800 LS 3400, KOBELCO 7065, MITSUBISHI FD 120 N, HITACHI CX 700 EX 220 LC EX 270 KH 125-3 KH 150-3 KH 180-3 KH 230-3 KH 300 UH 103 LC UH 123 || Compatible for CHALLENGER ROGATOR 554, FIAT HITACHI EX 220-2, SUMITOMO LS 2800, TIMBERJACK 308 360 C 380 380 B 380 C 460 C || New aftermarket parts, Manufactured to OEM standards and rigorously tested at the factory.
NUEPWRFA Part number: OUTER AIR FILTER 3I1073 7Y0413 9Y6849 7Y0404 3I0945 3I0831 || Part number: INNER AIR FILTER 3I0205 92E6102411 7Y0413 92E6102800 9Y6816 7Y0403 5I5208 || Approx. Dimensions: OUTER AIR FILTER Overall Length 342.8 mm (13.50 inch) Outer Diameter 232.2 mm (9.14 inch) Inner Diameter 146.8 mm (5.78 inch) Length 330.1 mm (13.00 inch) Bolt Hole Diameter 22.73 mm (0.89 inch) || Approx. Dimensions: INNER AIR FILTER Outer Diameter 144.8 mm (5.70 inch) Inner Diameter 116.3 mm (4.58 inch) Length 304.8 mm (12.00 inch) || Compatible for CATERPILLAR 320 320 L 320 S 322 325 325 LC 325 LN DP 120 N EL 240 B || Compatible for HINO P-KK196 P-KK198 P-KK199 RANGER P-FD162 RANGER P-FD164 RANGER P-FD165 RANGER P-FD166 RANGER P-FD168 RANGER P-FD169 RANGER P-FG192 RANGER P-FG193 RANGER P-FG194 RANGER P-FG195 RANGER P-FG196 RANGER P-FG197 || Compatible for ISUZU ESR 11 ESR 12 ESR 33 ETR 12 ETR 12 || Compatible for JCB JS 200 LC JS 240 LC LS 2800 LS 3400, KOBELCO 7065, MITSUBISHI FD 120 N, HITACHI CX 700 EX 220 LC EX 270 KH 125-3 KH 150-3 KH 180-3 KH 230-3 KH 300 UH 103 LC UH 123 || Compatible for CHALLENGER ROGATOR 554, FIAT HITACHI EX 220-2, SUMITOMO LS 2800, TIMBERJACK 308 360 C 380 380 B 380 C 460 C || New aftermarket parts, Manufactured to OEM standards and rigorously tested at the factory.
Engine Air Filter 5I-5208 5I5208 for Caterpilla 320 L 320-A 320-A L 320-A N 320-A S 320N 322 L 322 LN 322-A 322-A L 322-A LN 322-A N 322N 325 L 325 LN 325-A 325-A FM L 325-A L 325-A LN E200B EL200B
MASBYJX Part Number: 5I-5208 5I5208 || Applicable models: Fit for Caterpillar Excavator 320 L 320-A 320-A L 320-A N 320-A S 320N 322 L 322 LN 322-A 322-A L 322-A LN 322-A N 322N 325 L 325 LN 325-A 325-A FM L 325-A L 325-A LN E200B EL200B || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MASBYJX Part Number: 5I-5208 5I5208 || Applicable models: Fit for Caterpillar Excavator 320 L 320-A 320-A L 320-A N 320-A S 320N 322 L 322 LN 322-A 322-A L 322-A LN 322-A N 322N 325 L 325 LN 325-A 325-A FM L 325-A L 325-A LN E200B EL200B || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Information:
Engine Storage
If the engine will not be started for several weeks, the lubricating oil will drain from the cylinder walls and from the piston rings. Rust can form on the cylinder liner surface, which will increase engine wear which can reduce engine service life.To help prevent excessive engine wear, use the following guidelines:
Complete all of the lubrication recommendations that are listed in this Operation and Maintenance Manual, "Maintenance Interval Schedule" (Maintenance Section).
If freezing temperatures are expected, check the cooling system for adequate protection against freezing. Refer to this Operation and Maintenance Manual, "Refill Capacities and Recommendations" (Maintenance Section).If an engine is out of operation and if use of the engine is not planned, special precautions should be made. If the engine will be stored for more than one month, a complete protection procedure is recommended.Your Caterpillar dealer will have instructions for preparing the engine for extended storage periods.For more detailed information on engine storage, refer to Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products".Generator Storage
Short Time Storage
If the generator is not installed immediately, store the generator in a clean area. This area should also have the following conditions: low humidity, stable humidity and stable temperature. Space heaters must be energized in order to keep condensation from the windings. All accessory equipment that is supplied with the unit should be stored with the generator. The combined unit should be covered with a durable cover in order to protect against the following contaminants:
Dust
Dirt
Moisture
Other airborne abrasive elementsLong Time Storage
A storage period in excess of six months should be preceded by the following preparation:
Install desiccant bags inside the exciter's cover and install desiccant bags inside the screen of the fan.
Seal the unit in a covering of plastic or other material that has been designed for that purpose.
Adequately tag the generator. This will ensure that preservative greases and desiccant bags are removed before the unit is placed in operation.
If the engine will not be started for several weeks, the lubricating oil will drain from the cylinder walls and from the piston rings. Rust can form on the cylinder liner surface, which will increase engine wear which can reduce engine service life.To help prevent excessive engine wear, use the following guidelines:
Complete all of the lubrication recommendations that are listed in this Operation and Maintenance Manual, "Maintenance Interval Schedule" (Maintenance Section).
If freezing temperatures are expected, check the cooling system for adequate protection against freezing. Refer to this Operation and Maintenance Manual, "Refill Capacities and Recommendations" (Maintenance Section).If an engine is out of operation and if use of the engine is not planned, special precautions should be made. If the engine will be stored for more than one month, a complete protection procedure is recommended.Your Caterpillar dealer will have instructions for preparing the engine for extended storage periods.For more detailed information on engine storage, refer to Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products".Generator Storage
Short Time Storage
If the generator is not installed immediately, store the generator in a clean area. This area should also have the following conditions: low humidity, stable humidity and stable temperature. Space heaters must be energized in order to keep condensation from the windings. All accessory equipment that is supplied with the unit should be stored with the generator. The combined unit should be covered with a durable cover in order to protect against the following contaminants:
Dust
Dirt
Moisture
Other airborne abrasive elementsLong Time Storage
A storage period in excess of six months should be preceded by the following preparation:
Install desiccant bags inside the exciter's cover and install desiccant bags inside the screen of the fan.
Seal the unit in a covering of plastic or other material that has been designed for that purpose.
Adequately tag the generator. This will ensure that preservative greases and desiccant bags are removed before the unit is placed in operation.
Caterpillar parts catalog:
Parts element Caterpillar catalog:
9M2341
ELEMENT AS-FUEL FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 215, 215B, 224B, 235, 235B, 245, 3114, 311...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 215, 215B, 224B, 235, 235B, 245, 3114, 311...
7Y0463
ELEMENT
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, ...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, ...
7Y0404
ELEMENT AS-OUTER
325, 325 L, 325 LN, E200B
325, 325 L, 325 LN, E200B
0964175
ELEMENT
E110B, E120B, E200B
E110B, E120B, E200B
0966431
ELEMENT
E110B, E120B, E200B, E240C, E300B, E70B, EL240B
E110B, E120B, E200B, E240C, E300B, E70B, EL240B
0966144
ELEMENT
E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
0946352
ELEMENT, INNER
E110B, E120B, E200B
E110B, E120B, E200B
7Y0403
ELEMENT, INNER
E200B
E200B
7Y0404
ELEMENT AS-OUTER
325, 325 L, 325 LN, E200B
325, 325 L, 325 LN, E200B
3396955
ELEMENT-COUPLING
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D2 L, 323E L
3919052
ELEMENT
2384C, 2484C, 559C, 579C
2384C, 2484C, 559C, 579C
3516015
ELEMENT
584
584
3244185
ELEMENT-COUPLING
345C, 345C L, 345C MH, W345C MH
345C, 345C L, 345C MH, W345C MH
7Y0463
ELEMENT
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, ...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 325, 325 L, 325 LN, 325B, 325B L, ...
3964993
ELEMENT AS-JACKET WATER HEATER
374F L, 390F L, D9T
374F L, 390F L, D9T
3918605
ELEMENT AS-JACKET WATER HEATER
390F L, D9T
390F L, D9T
5I7563
ELEMENT
320 L, 320N
320 L, 320N
4629035
ELEMENT
FB221
FB221
4635085
ELEMENT AS.
FB221
FB221