6N6072 ELEMENT AS-AIR CLEANER Caterpillar parts
3406, 3406B, 3408, 3412, 777B, D399, PR-1000, PR-750B, RR-250, SS-250
Rating:
Alternative (cross code) number:
CA6N6072
6N-6072
6N6072
CA6N6072
6N-6072
6N6072
Weight: 4 pounds 2 kg.
Information:
EFFECTIVE FILTER AREA
2.58
mm2
LENGTH
432.82
mm
MAJOR OD
219.96
mm
MINOR OD
209.8
mm
TYPE
000000000001
COLD PLANER, TRUCK,
Cross Reference:
ALCO FILTER
MD-534,
BALDWIN
PA1905,
CATERPILLAR
6N-6072,
CLEAN FILTERS
MA 575,
DONALDSON
P114931,
FLEETGUARD
AF883M,
GIF FILTER
GA 817,
HENGST FILTER
E744LS,
LAUTRETTE
FA 3231,
LIEBHERR
736 1354,
LUBERFINER
LAF 9159,
MAHLE FILTER
LXS 24,
MISFAT
R996,
RENAULT TRUCKS
00 03 564 086,
SCT Germany
SW 3861,
SOFIMA
S 3450 A,
UFI
27.996.00,
VOLVO
4881175,
4881175-6,
WIX FILTERS
42132,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Engine Air Filter 7N-1308 7N1308 for Caterpillar Cold Planer PR-1000 PR-1000C PR-750B Engine - Generator Set D399 SR4
MASBYJX Part Number: 6N-6072 6N6072 || Applicable models: Fit for Caterpillar Cold Planer PR-1000 PR-1000C PR-750B Engine - Generator Set D399 SR4 Off-Highway Truck 776B 777B Engine - Industrial 3406B 3406 3408 3408B 3412 D349 D399 Road Reclaimer RR-250 SS-250 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MASBYJX Part Number: 6N-6072 6N6072 || Applicable models: Fit for Caterpillar Cold Planer PR-1000 PR-1000C PR-750B Engine - Generator Set D399 SR4 Off-Highway Truck 776B 777B Engine - Industrial 3406B 3406 3408 3408B 3412 D349 D399 Road Reclaimer RR-250 SS-250 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Aftermarket Air Filter 8C-2238 6N-6072 Fit Intended For Engine 3208 3406 3412 Truck 777B
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts || Oil Filters
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts || Oil Filters
$46.11
09 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Element A/SEC 6N6072 New
This part in 4 request:
Show.
This information for suppliers only!
2024-10-10
2023-05-24
2023-04-11
2023-04-11
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 6N6072:
Information:
3114 (5YL, 9LL),
3116 (7SF, 9CJ, 2BK, 9GK, 7JL, 9LN, 9YN, 2FR, 7HS),
3126 (8HW, 7LZ) Truck EnginesReference: Troubleshooting Guide For The 3100 Family Of Diesel Engines With Mechanical Unit Injectors, LEVN4032, (45 minute Video).The lower O-ring seal has been removed from the fuel injector group. See the illustration. Tests indicate this O-ring seal is not an effective seal after a few hours of operation. This seal can take up a portion of the clamping force when the injector in installed in the cylinder head. When the seal deteriorates, this could lessen the clamping force holding the injector in position.
Until all injectors with the lower O-ring seal are depleted from inventory, it is suggested that the lower O-ring seal be removed when installing a new or remanufactured injector in the engine.
The area that seals the combustion gas from the fuel is the area of metal to metal contact between the injector cone and the sleeve. It is recommended that the sleeve be reamed whenever an injector is removed.
To confirm that a good seal exists between the injector and sleeve, use a 2P-8278 Air Fuel Tube Assembly (Plastic Sight Glass) in the fuel return to tank line after the injector installation. Use the sight glass while the engine is running to determine if there is combustion gas leakage. A steady stream of small (pencil point size) bubbles, or one pea sized bubble every 2 to 3 seconds is acceptable. If there are any more air bubbles than that, use the diagnostic procedure recommended in the Reference Troubleshooting Guide to isolate and repair the leak.
Location of the O-ring seal to be removed from the fuel injector group.
3116 (7SF, 9CJ, 2BK, 9GK, 7JL, 9LN, 9YN, 2FR, 7HS),
3126 (8HW, 7LZ) Truck EnginesReference: Troubleshooting Guide For The 3100 Family Of Diesel Engines With Mechanical Unit Injectors, LEVN4032, (45 minute Video).The lower O-ring seal has been removed from the fuel injector group. See the illustration. Tests indicate this O-ring seal is not an effective seal after a few hours of operation. This seal can take up a portion of the clamping force when the injector in installed in the cylinder head. When the seal deteriorates, this could lessen the clamping force holding the injector in position.
Until all injectors with the lower O-ring seal are depleted from inventory, it is suggested that the lower O-ring seal be removed when installing a new or remanufactured injector in the engine.
The area that seals the combustion gas from the fuel is the area of metal to metal contact between the injector cone and the sleeve. It is recommended that the sleeve be reamed whenever an injector is removed.
To confirm that a good seal exists between the injector and sleeve, use a 2P-8278 Air Fuel Tube Assembly (Plastic Sight Glass) in the fuel return to tank line after the injector installation. Use the sight glass while the engine is running to determine if there is combustion gas leakage. A steady stream of small (pencil point size) bubbles, or one pea sized bubble every 2 to 3 seconds is acceptable. If there are any more air bubbles than that, use the diagnostic procedure recommended in the Reference Troubleshooting Guide to isolate and repair the leak.
Location of the O-ring seal to be removed from the fuel injector group.
Caterpillar parts catalog:
Parts element Caterpillar catalog:
D379B, D399, D6D, G342C, G398, G399
245B, 3406, 3406B, 3408B, 3412, 589, 631E, 637D, 637E, 651E, 657E, 768C, 769C, 772B, 773B, 775B, 992C, 992D, 994, D11N, D8L, G3406, G3408, G3408B, G3412, G3508, G3512, G3516, RR-250, SM-350, SS-250
3406, 3412, 637D, 657E, 769C, 773B, 834B, 988B, 992C, 992D, D10
3406, 3408, 3412
3406, 3406B, 3408, 3412, D399, PR-1000, PR-750B, RR-250, SS-250
1674, 1676, 1693, 3116, 3126, 3126B, 3306, 3406, 3408
12E, 14E, 16, 768B, 769, 769C, 772, 772B, 773, 773B, 776, 777, 777B, 785, 789, 955H, 977H, D320A
163, 173B, 183B, 184, 215, 225, 231D, 235, 50, 572G, 578, 613, 613B, 613C, 613C II, 621, 631C, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 769C, 772, 772B, 773, 773B, 776, 777, 777B, 785, 814, 82...
613B, 641B, 650B, 651E, 657B, 657E, 768B, 769, 769C, 772, 773, 773B, 777, 777B, 824B, 920, 930, 950, 955K, 966C, 977K, 980B, 983, 992, 992C, AD40, AD45, AE40, D10, D6C, D8K
RR-250, SS-250
PR-1000
3406, 3408, 3412
3406, 3408, 3412
3406, 3412, 637D, 657E, 769C, 773B, 834B, 988B, 992C, 992D, D10
3304, 3306
3160, 3208
4162710
ELEMENT AS
C7.1
C7.1
5Y0694
ELEMENT AS
3304B, 3306B
3304B, 3306B
12E, 12G, 130G, 215, 3304B, 518, 561B, 920, 926, 930, 941, 950, 951B, 955H, D4D, D4E, D4E SR, E180, G3304, IT28B
2Y5801
ELEMENT
3304B, 966R
3304B, 966R
1674, 1676, 1693, 3116, 3126, 3126B, 3306, 3406, 3408
3406, 3406B, 3408, 3412, D399, PR-1000, PR-750B, RR-250, SS-250