6N7617 ELEMENT Caterpillar parts
120G, 12G, 130G, 140G, 14G, 1673C, 215, 225, 235, 3208, 3304, 3306, 518, 528, 561D, 613B, 627B, 637D, 815, 920, 941, 950, 951B, 955K, 955L, 966C, 977K, 977L, 980B, D4D, D4E, D5, D5B, D6C, D6D, D7G
Rating:
Alternative (cross code) number:
CA6N7617
6N-7617
6N7617
CA6N7617
6N-7617
6N7617
Weight: 1 pounds 0 kg.
EXCAVATOR, WHEEL TRACTOR,
Cross Reference:
ALLIS-CHALMERS
74024223,
BALDWIN
BF912,
CATERPILLAR
6N-7617,
8N-9803,
JOHN DEERE
AR86755,
DONALDSON
P559803,
FLEETGUARD
FS1205,
SCT Germany
ST 369,
WIX FILTERS
33369,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
LeleoCar P559803 Fuel Filter Replacement for Engine Agricultural Machinery Tractors 6650 6750 6850 678HTA TR97 Replace for AR86755 6N7617 4024223
LeleoCar Replace Part Number: P559803, AR86755, 6N7617, 4024223, LFF1131, 33369, BK6240, F53123, PS3607A, FS1205, 9Y4445, 40302519, 19797, 40-0002519, 8N-9803, 3I1412, 9N-6308, BF912. || Wide Application: Fit for agricultural machinery tractors 6650 6750 6850 678HTA TR97; large lawn mowers and excavators. || Function: P559803 Fuel Filter effectively remove solid impurities and contaminants in the fuel (rust, pieces of paint, dirt, etc.), to avoid blockage of the fuel system increase engine power. || Feature: Stable performance and long service life. || Package Include: 1*P559803 Fuel Filter.
LeleoCar Replace Part Number: P559803, AR86755, 6N7617, 4024223, LFF1131, 33369, BK6240, F53123, PS3607A, FS1205, 9Y4445, 40302519, 19797, 40-0002519, 8N-9803, 3I1412, 9N-6308, BF912. || Wide Application: Fit for agricultural machinery tractors 6650 6750 6850 678HTA TR97; large lawn mowers and excavators. || Function: P559803 Fuel Filter effectively remove solid impurities and contaminants in the fuel (rust, pieces of paint, dirt, etc.), to avoid blockage of the fuel system increase engine power. || Feature: Stable performance and long service life. || Package Include: 1*P559803 Fuel Filter.
P559803 Fuel Filter Replacement for Engine Agricultural Machinery Tractors 6650 6750 6850 678HTA TR97 Replace for AR86755 6N7617 4024223 (6)
ROYAL HOLDING Fuel Filter Replacement 6650 6750 6850 678HTA TR97 Replace ford AR86755 6N7617 4024223 mack 3076PS3607A ford 703631 carterpillar 1046Z506 || Replace Part Number: P559803, AR86755, 6N7617, 4024223, LFF1131, 33369, BK6240, F53123, PS3607A, FS1205, 9Y4445, 40302519, 19797, 40-0002519, 8N-9803, 3I1412, 9N-6308, BF912. || Function: P559803 Fuel Filter effectively remove solid impurities and contaminants in the fuel (rust, pieces of paint, dirt, etc.), to avoid blockage of the fuel system increase engine power.
ROYAL HOLDING Fuel Filter Replacement 6650 6750 6850 678HTA TR97 Replace ford AR86755 6N7617 4024223 mack 3076PS3607A ford 703631 carterpillar 1046Z506 || Replace Part Number: P559803, AR86755, 6N7617, 4024223, LFF1131, 33369, BK6240, F53123, PS3607A, FS1205, 9Y4445, 40302519, 19797, 40-0002519, 8N-9803, 3I1412, 9N-6308, BF912. || Function: P559803 Fuel Filter effectively remove solid impurities and contaminants in the fuel (rust, pieces of paint, dirt, etc.), to avoid blockage of the fuel system increase engine power.
Number on catalog scheme:
5
For full view, you need register
Information:
Use this procedure to troubleshoot the electrical system if a problem is suspected with the circuit for the idle/rated switch.
Illustration 1 g03845607Recommended Actions
Table 1
Troubleshooting Test Steps Value Results
1. Inspect Electrical Connectors and Wiring.
A. Turn the engine control switch to the OFF position.
B. Thoroughly inspect the J1/P1 connector. Thoroughly inspect the J17/P17 connector. The connectors should be free of abrasions, corrosion, and pinch points. Refer to Troubleshooting, "Electrical Connectors - Inspect".
C. Perform a 45 N (10 lb) pull test on each of the wires that are associated with the engine shutdown switch.
D. Check the allen head screw on each ECM connector for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect".
E. Check the harness for abrasions and for pinch points from the battery to the ECM.
Electrical connectors and wiring
Result : The electrical connectors and wiring are OK.
Proceed to Test Step 2.
Result : The electrical connectors and wiring are NTO OK.
Repair : Repair the connectors or the harness and/or replace the connectors or the harness. Ensure that all of the seals are correctly in place and ensure that the connectors are coupled.
If the problem is not resolved, proceed to Test Step 2.
2. Check the Switch Status with Cat® Electronic Technician (ET).
A. Turn the engine control switch to the OFF position.
B. Connect to the service tool connector.
C. Turn the engine control switch to the ON position. The engine should remain in the OFF position.
D. Observe the status of the idle/rated switch on Cat ET. Operate the idle/rated switch and observe the status.
Engine control switch status
Result : The shutdown switch status is OK.
Repair : The shutdown input is functioning properly. Refer to Troubleshooting, "Electrical Connectors - Inspect" for further information.
Result : The shutdown switch status is NOT OK.
Proceed to Test Step 3.
3. Short the Switch Inputs at the Switch.
A. Turn the engine control switch to the OFF position.
B. Disconnect the wires from the idle/rated switch.
C. Turn the engine control switch to the ON position. The engine should remain in the OFF position.
D. Connect and disconnect the wires for the idle/rated switch. Observe the status on Cat ET.
Engine control switch status
Result : The engine control switch status is OK.
Repair : Check the switch terminals for corrosion or damage. If there is no corrosion or damage, replace the idle/rated switch.
Result : The engine control switch status is NOT OK.
Proceed to Test Step 4.
4. Check for Engine Ground at the Switch.
A. Disconnect the -Battery wire at the idle/rated switch.
B. Measure the resistance between the- battery wire and engine ground.
The resistance measures less than 10 Ohms.
Engine ground
Result : The engine ground is OK.
Proceed to Test Step 5.
Result : The engine ground is NOT OK.
Repair : There is an open in the harness. Repair the harness or replace the harness.
5. Check the Resistance through the Harness.
A. Disconnect the wires from the idle/rated switch. Connect the two wires together without the switch.
B. Disconnect J1/P1.
C. Measure the resistance between P1-75 and P1-81.
The resistance measures less than 10 Ohms.
Harness
Result : The harness is OK.
Proceed to Test Step 6.
Result : The
Illustration 1 g03845607Recommended Actions
Table 1
Troubleshooting Test Steps Value Results
1. Inspect Electrical Connectors and Wiring.
A. Turn the engine control switch to the OFF position.
B. Thoroughly inspect the J1/P1 connector. Thoroughly inspect the J17/P17 connector. The connectors should be free of abrasions, corrosion, and pinch points. Refer to Troubleshooting, "Electrical Connectors - Inspect".
C. Perform a 45 N (10 lb) pull test on each of the wires that are associated with the engine shutdown switch.
D. Check the allen head screw on each ECM connector for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect".
E. Check the harness for abrasions and for pinch points from the battery to the ECM.
Electrical connectors and wiring
Result : The electrical connectors and wiring are OK.
Proceed to Test Step 2.
Result : The electrical connectors and wiring are NTO OK.
Repair : Repair the connectors or the harness and/or replace the connectors or the harness. Ensure that all of the seals are correctly in place and ensure that the connectors are coupled.
If the problem is not resolved, proceed to Test Step 2.
2. Check the Switch Status with Cat® Electronic Technician (ET).
A. Turn the engine control switch to the OFF position.
B. Connect to the service tool connector.
C. Turn the engine control switch to the ON position. The engine should remain in the OFF position.
D. Observe the status of the idle/rated switch on Cat ET. Operate the idle/rated switch and observe the status.
Engine control switch status
Result : The shutdown switch status is OK.
Repair : The shutdown input is functioning properly. Refer to Troubleshooting, "Electrical Connectors - Inspect" for further information.
Result : The shutdown switch status is NOT OK.
Proceed to Test Step 3.
3. Short the Switch Inputs at the Switch.
A. Turn the engine control switch to the OFF position.
B. Disconnect the wires from the idle/rated switch.
C. Turn the engine control switch to the ON position. The engine should remain in the OFF position.
D. Connect and disconnect the wires for the idle/rated switch. Observe the status on Cat ET.
Engine control switch status
Result : The engine control switch status is OK.
Repair : Check the switch terminals for corrosion or damage. If there is no corrosion or damage, replace the idle/rated switch.
Result : The engine control switch status is NOT OK.
Proceed to Test Step 4.
4. Check for Engine Ground at the Switch.
A. Disconnect the -Battery wire at the idle/rated switch.
B. Measure the resistance between the- battery wire and engine ground.
The resistance measures less than 10 Ohms.
Engine ground
Result : The engine ground is OK.
Proceed to Test Step 5.
Result : The engine ground is NOT OK.
Repair : There is an open in the harness. Repair the harness or replace the harness.
5. Check the Resistance through the Harness.
A. Disconnect the wires from the idle/rated switch. Connect the two wires together without the switch.
B. Disconnect J1/P1.
C. Measure the resistance between P1-75 and P1-81.
The resistance measures less than 10 Ohms.
Harness
Result : The harness is OK.
Proceed to Test Step 6.
Result : The
Cat SIS web machinery list:
Parts element Caterpillar catalog:
235, 235C, 621, 623, 627, 627B, 637D, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 772, 773, 824B, 966C, 977K, 977L, 988, 992
225, 227, 229, 235, 245, 245B, 589, 615, 621, 621B, 621E, 621F, 623, 623B, 627B, 627E, 631C, 631E, 633D, 637D, 777, 834B, 988B, 992, 992C, 992D, D10, D10N, D11N, D11R, D8L, D9L, TK1051
225, 229, 235, 245, 245B, 589, 623B, 631C, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 777, 988B, 992C, 992D, D10, D11N
120G, 12G, 14G, 16G, 561C, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631C, 631E, 631G, 633D, 633E II, 637E, 637G, 776, 931B, 931C II, 933, 939, 941, 955K, 966D, 988B, 992C, D5, D5B, ...
163, 173B, 183B, 184, 215, 225, 231D, 235, 50, 572G, 578, 613, 613B, 613C, 613C II, 621, 631C, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 769C, 772, 772B, 773, 773B, 776, 777, 777B, 785, 814, 82...
245, 583K, 621B, 621R, 627B, 777, 824C, 826C, 963, 973, 980B, 980C, 980F, 992, D10, D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, D6C, D6D, D8H, D8K
120G, 215, 215B, 930, 943, D4E, IT28
225
173B, 183B, 193, 936, 955L, 966D, 977L, 980C, 983B, CS-643, D7G, D9H, G936
613B, 641B, 650B, 651E, 657B, 657E, 768B, 769, 769C, 772, 773, 773B, 777, 777B, 824B, 920, 930, 950, 955K, 966C, 977K, 980B, 983, 992, 992C, AD40, AD45, AE40, D10, D6C, D8K
627B, 777, 963, 973
120G, 120H ES, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 5130, 5130B, 936F, 950F, 950F II, 960F, 966F,...
46, 977H, D315, D326F, D337, D337F, D342, D353C, D397D, D8H, D9E, D9G
1693, 824, D326F, D337F, D343, D353C, D9E, D9G
1673, 1673B, 3181, 3192, 651, 657, 824, D326F, D336, D337, D337F, D343, D353C, D375D, D379A, D397D, D9E, G398
1676, 1693, 3406, D342, D342C, D343, D379A
2L1923
ELEMENT ASSEM.
3406, D333A, D337F, D342, D342C, D343
3406, D333A, D337F, D342, D342C, D343
3408, D342C, D353C, D379A
7B1677
ELEMENT
955C, 977D, D315, D326F, D337, D337F, D342, D364, D375D, D397D
955C, 977D, D315, D326F, D337, D337F, D342, D364, D375D, D397D
120B, 120G, 130G, 140B, 140G, 14G, 1673C, 225, 225D, 227, 231D, 235, 3114, 3116, 3208, 3304, 3306, 3306B, 3406B, 518, 528, 561D, 613C, 613C II, 627B, 637D, 815, 920, 950, 955L, 966C, 977L, AP-1000B, A...
130G, 528, 637D, 657B, 955L, 980B, D4D, D4E SR, D5, D5B
3406, 3408, 777, D348, D349, D399