7M3800 ELEMENT ASSEM. Caterpillar parts
12E, 955H, 977H, D320A, D330A, D333A, D342, D342C, D8H
Rating:
Alternative (cross code) number:
CA7M3800
7M-3800
7M3800
CA7M3800
7M-3800
7M3800
Weight: 2 pounds 1 kg.
INDUSTRIAL ENGINE, TRACK-TYPE TRACTOR,
Cross Reference:
ATLAS COPCO
97100376,
BALDWIN
PT670,
BOSCH
1 457 429 590,
CASE IH
3066975R91,
3069416R91,
CATERPILLAR
1M 9156,
1R 0659,
1R 0719,
1W 7399,
2M 3243,
2M 3943,
2S 1677,
4A 0339,
4J 4195,
4W 4840,
4W 4926,
5B 5937,
5S 0484,
5S 5484,
7M 3800,
7M 5264,
7M 7176,
7S 6638,
8N 4301,
9F 6426,
9F 6427,
9F 6428,
9F 6430,
9G 6420,
9Y 4520,
P5 S 484,
CHAMP
LP161,
CLEAN FILTERS
ML411,
CROSLAND
402,
DAF
110371,
DEUTZ-FAHR
0116 0212,
0116 1212,
DEUTZ
0116 0212,
0116 1212,
DONALDSON
P55-0484,
FIAT
9933149,
FLEETGUARD
LF558,
FORD
5 000 849,
A 730 X 6744 GA,
FRAM
CH191APL,
GMC
25010417,
5573597,
5576057,
5579770,
6438403,
HENGST FILTER
E235.41/1,
E235H01,
E235H03,
INTERNATIONAL HARV.
3066975R91,
3069416R91,
IHC
3066975R91,
3069416R91,
KHD
0116 0212,
0116 1212,
KNECHT
OX3,
OX56,
KOLBENSCHMIDT
096-OC,
KOMATSU
1306048140,
1454922430,
1454932430,
1541912130,
4D155A5523,
6003200110,
6110535120,
6114505100,
6120505101,
6120505102,
6120505103,
6610535120,
LAUTRETTE
ELH4727,
MAN
90.80119.5131,
MANN-FILTER
H1072/11X,
H1081,
MOPAR PARTS
L47,
MOTORCRAFT
EFL228,
MWM
6.054.0.035.000.3,
6.054.0.035.002.3,
PURFLUX
L503,
PUROLATOR
L57151,
RENAULT
00 04 307 426,
00 04 402 531,
00 24 563 011,
00 24 568 011,
00 24 568 658,
00 24 586 011,
00 25 568 011,
SogefiPro
FA4225,
TECNOCAR
OP191,
TEHO
5093,
UFI
2543100,
WIX FILTERS
51161,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
One New Oil/Hydraulic Filter Element Fits CAT, Fits Caterpillar D2 D4 D4C D4D D5 D5B D6 D6B D6C D6D D6D SR D7 D7C Models Interchangeable with 1R0659, 1R0659-A, 4W4840, 4W4840-A, 7M3800, 8N430
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
One New Oil/Hydraulic Filter Element Fits CAT, Fits Caterpillar D2 D4 D4C D4D D5 D5B D6 D6B D6C D6D D6D SR D7 D7C Models Interchangeable with 1R0659, 1R0659-A, 4W4840, 4W4840-A, 7M3800, 8N430
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
One New Oil/Hydraulic Filter Element Fits CAT, Fits Caterpillar D2 D4 D4C D4D D5 D5B D6 D6B D6C D6D D6D SR D7 D7C Models Interchangeable with 1R0659, 1R0659-A, 4W4840, 4W4840-A, 7M3800, 8N430
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Stevens Lake Parts One New Aftermarket Replacement Oil/Hydraulic Filter || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications.
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 7M3800:
Information:
Removal Procedure
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Ensure that the engine can not be started while this maintenance is being performed. To help prevent possible injury, do not use the starting motor to turn the flywheel.Hot engine components can cause burns. Allow additional time for the engine to cool before measuring/adjusting valve lash clearance.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines, all hoses, and all tubes. This helps to prevent debris from entering the system.
Illustration 1 g00498335
Loosen two clamps (1) from hose (2) .
Remove hose (2) from air cleaner (3) .
Illustration 2 g00498339
Loosen clamp (4) and remove hose (5) from air cleaner (3) .
Remove line (6) from air cleaner (3) .
Illustration 3 g00498362
Remove the bolt and washer (7) .
Remove air filter indicator (8) .
Illustration 4 g00498366
Remove four bolts and washers (9) .
Remove air cleaner (3) from the machine.Installation procedure
Illustration 5 g00498366
Install air cleaner (3) to the machine.
Install washers and four bolts (9) .
Illustration 6 g00498362
Install air filter indicator (8) .
Install the washer and bolt (7) .
Illustration 7 g00498339
Install line (6) to air cleaner (3) .
Install hose (5) to air cleaner (3) and tighten clamp (4) .
Illustration 8 g00498335
Install hose (2) to air cleaner (3) and tighten two clamps (1) .End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Ensure that the engine can not be started while this maintenance is being performed. To help prevent possible injury, do not use the starting motor to turn the flywheel.Hot engine components can cause burns. Allow additional time for the engine to cool before measuring/adjusting valve lash clearance.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines, all hoses, and all tubes. This helps to prevent debris from entering the system.
Illustration 1 g00498335
Loosen two clamps (1) from hose (2) .
Remove hose (2) from air cleaner (3) .
Illustration 2 g00498339
Loosen clamp (4) and remove hose (5) from air cleaner (3) .
Remove line (6) from air cleaner (3) .
Illustration 3 g00498362
Remove the bolt and washer (7) .
Remove air filter indicator (8) .
Illustration 4 g00498366
Remove four bolts and washers (9) .
Remove air cleaner (3) from the machine.Installation procedure
Illustration 5 g00498366
Install air cleaner (3) to the machine.
Install washers and four bolts (9) .
Illustration 6 g00498362
Install air filter indicator (8) .
Install the washer and bolt (7) .
Illustration 7 g00498339
Install line (6) to air cleaner (3) .
Install hose (5) to air cleaner (3) and tighten clamp (4) .
Illustration 8 g00498335
Install hose (2) to air cleaner (3) and tighten two clamps (1) .End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Cat SIS web machinery list:
Parts element Caterpillar catalog:
D337F, D342, D342C, D375D, D397D
12E, 12G, 130G, 215, 3304B, 518, 561B, 920, 926, 930, 941, 950, 951B, 955H, D4D, D4E, D4E SR, E180, G3304, IT28B
1673, D342C, D8H
D320A
12E, 14E, 16, 768B, 769, 769C, 772, 772B, 773, 773B, 776, 777, 777B, 785, 789, 955H, 977H, D320A
163, 173B, 183B, 184, 215, 225, 231D, 235, 50, 572G, 578, 613, 613B, 613C, 613C II, 621, 631C, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 769C, 772, 772B, 773, 773B, 776, 777, 777B, 785, 814, 82...
245, 583K, 621B, 621R, 627B, 777, 824C, 826C, 963, 973, 980B, 980C, 980F, 992, D10, D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, D6C, D6D, D8H, D8K
191, 46, 977H, D8H, D8K, D9G, D9H
120B, 12E, 140B, 14E
16, 3208, 631C, 657B, 824B, 983
D337F, D342, D342C, D375D, D397D
D379B
D379B
G3304, G3306, G3406, G3408, G3408B, G3408C, G3412, G3508, G3512, G3516
2S1316
ELEMENT ASSEM.
561B, 621, 955K, 977K, 980, D342C
561B, 621, 955K, 977K, 980, D342C
D348, D379B, D398
D342, D342C
3S7708
ELEMENT ASSEM.
1676, D336
1676, D336