ELEMENT AS- 9Y7809 - Caterpillar

9Y7809 ELEMENT AS- Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9Y7809
9Y-7809
9Y7809

Weight: 7 pounds 3 kg.

Buy ELEMENT AS- 9Y7809 Caterpillar genuine, new aftermarket tractor parts with delivery

Cross Reference:

CASE IH 326287C91, CATERPILLAR 1Z2280, 2R0326, 2R0335, 4S7792, 5B0345, 6L2610, 9Y7809, CUMMINS 150785, 299347, FIL FILTER HP 671, FLEETGUARD AF347M, GMC 5143475, 5143476, 5143478, 5143479, 6424683, 8994704, 8994705, MACK 2191P101760, 2MD19328, 2MD419, 2MD419P1, 2MD419P2, RENAULT TRUCKS 3564006,

For full view, you need register

Information:

Rework Procedure
In addition to parts specified in the parts list, you will need 1 meter of 18 AWG GXL - ORANGE wire and 2 meters of 18 AWG GXL - BROWN wire.
1. Remove wire ID 133-C3103 OR-18 from connector C-C343 at pin 25. Insulate the terminal with heat shrink. Refer to Images1.1.1 and 1.1.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.1.1
Image1.1.2
2. Splice into wire ID R800-OR circuit at machine control module at pin J1:69. Using the parts needed below, route new wire, id OR-18, to connector C-C343 at pin 25. Refer Images1.2.1 and 1.2.2.
Parts Needed:
9X-3401 Connector Pin (Qty 1)
Orange Wire (Qty 1 Meter)
9X-3402 Connector Socket (Qty 1)
Splice Wire Assembly (Qty 1)
115-8109 Splice (Qty 2)
Note: Procedure to make "Splice Wire Assembly" is shown in Image1.7.1
Image1.2.1
Image1.2.2
3. Remove wire id 200-P11 BK-18 from connector P-C312 at pin 2 and insulate the terminal with heat shrink. Refer to Images1.3.1 and 1.3.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.3.1
Image1.3.2
4. Splice into wire id L731-BR ground circuit at connector P-C83, pin 2. Using the parts needed below, route new BR-18 wire to P-C312 at pin 2. Refer to Images1.4.1 and 1.4.2.
Parts Needed:
374-8372 Socket (Qty 1)
Brown Wire (Qty 1 Meter)
136-4877 Wire Splice (Qty 1)
Image1.4.1
Image1.4.2
5. Remove wire id 200-LP24 BK-18 from connector LP-C6 at pin 2 and insulate the terminal with heat shrink. Refer to Images1.5.1 and 1.5.2.
Parts Needed:
125-7874 Heat Shrink (Bulk Tube)
Image1.5.1
Image1.5.2
6. Splice into wire id L731-BR circuit at connector LP-C3, pin 2. Using the parts needed below, route new BR-18 wire to LP-C6, pin 2. Refer to Images1.6.1 and 1.6.2.
Parts Needed:
374-8372 Socket (Qty 1)
Brown Wire (Qty 1 Meter)
136-4877 Wire Splice (Qty 1)
Image1.6.1
Image1.6.2
Parts needed to make the "Splice Wire Assembly" is shown below and in Image1.7.1.
Parts Needed:
8T-8729 Connector Pin (Qty 2)
8T-8730 Connector Socket (Qty 1)
125-7874 Sealed Tube (Qty 5 CM)
18 AWG-SXL-YL Wire (Qty 4 DM)
Image1.7.1